Zestaw korka rozdzielacza Quicksilver 811635Q2 do wybranych 4-cylindrowych silników marynowanych firmy General Motors z układami zapłonowymi Delco EST

Brand:Quicksilver

3.8/5

271.50

Zaprojektowany tak, aby był odporny na zakłócenia RFI z pokładową elektroniką. Wirnik o wysokim stosunku wytrzymałości do masy zapewnia trwałość i odporność na pękanie termiczne. Wkładki z litego mosiądzu są odporne na korozję i wżery elektryczne, zapewniając długą żywotność. Wyprodukowano zgodnie ze specyfikacjami producenta oryginalnego wyposażenia Mercury Marine, aby jak najlepiej chronić silnik MerCruiser. Nasadka dystrybutora jest wykonana z mieszanki tworzyw sztucznych PBT i PET w celu zwiększenia wytrzymałości, sztywności i odporności na wypaczenia, co jest ważne w tej konstrukcji dystrybutora.

Zaprojektowany tak, aby był odporny na zakłócenia RFI z pokładową elektroniką. Wirnik o wysokim stosunku wytrzymałości do masy zapewnia trwałość i odporność na pękanie termiczne. Wkładki z litego mosiądzu są odporne na korozję i wżery elektryczne, zapewniając długą żywotność. Wyprodukowano zgodnie ze specyfikacjami producenta oryginalnego wyposażenia Mercury Marine, aby jak najlepiej chronić silnik MerCruiser. Nasadka dystrybutora jest wykonana z mieszanki tworzyw sztucznych PBT i PET w celu zwiększenia wytrzymałości, sztywności i odporności na wypaczenia, co jest ważne w tej konstrukcji dystrybutora.
Brand Quicksilver
Brand ‎Quicksilver
Brand Name ‎Quicksilver
Closure Type ‎Twist On
Color Unspecified
Color ‎Unspecified
Customer Reviews 4.7 4.7 out of 5 stars 332 ratings 4.7 out of 5 stars
Fishing Technique ‎Spinning, Casting
Included Components ‎Cap
Item Dimensions LxWxH 8 x 5.25 x 4.5 inches
Item Dimensions LxWxH ‎8 x 5.25 x 4.5 inches
Item Package Dimensions L x W x H ‎8 x 5.4 x 4.6 inches
Manufacturer ‎Quicksilver
Material Various Materials
Material ‎Various Materials
Model Name ‎811635Q2 Distributor Cap Kit - Marinized 4-Cylinder Engines by General Motors with Delco EST Ignition Systems
Number of Items ‎1
Package Weight ‎0.45 Pounds
Part Number ‎811635Q2
Size ‎Unspecified
Style Modern
Style ‎Modern
Suggested Users ‎Boat Engine Parts and Accessories

3.8

13 Review
5 Star
84
4 Star
10
3 Star
3
2 Star
1
1 Star
2

Napisz recenzję

Twój e-mail nie zostanie opublikowany. Wszystkie pola obowiązkowe są oznaczone symbolem*

Scritto da: Bobby
Boat runs smoother after changing
Worked like it’s supposed to.
Scritto da: Gail P.
Rotor too small
The Distributer Cap is fine fits good seems to be sturdy. The Rotor doesn't fit on the shaft of the distributer. Even tried to lube with dielectric grease. It ended up cracking and spliting. I just reused the old rotor. Fortunately the old one was in pretty good condition and only a year old. The cap was the only thing that I really needed. 2nd time Quicksilver Parts have been a disappointment this year. They where always reliable in the past. Don't know what happened but I may go with other parts in the future.
Scritto da: Dan W.
Fixed my low power problem
See pictures. This is the old cap. Corroded terminals. I had a low power problem with my 3.0 liter Mercruiser TKS at full throttle. It wouldn't go over 3000 RPM. Carb rebuild, fuel filter, and new anti-siphon valve didn't solve the problem. New spark plugs and a new distributor cap and rotor did solve the problem.
Scritto da: JR
Big difference in engine performance...
I replaced my old cap and rotor with these and it made a HUGE difference in performance for my 1995 Bayliner with a 3.0L Mercruiser engine. The old cap and rotor were very old and had corrosion on them. My max RPMs was about 3,900 at full throttle before, now I can get to about 4,500 at full throttle. I was able to take the old parts off and replace in about 10 minutes. It would have been less time, but my old rotor was rusted on the distributor shaft, so I had to do a little convincing to get it off of the shaft(used a screw driver to carefully pry). :)
Scritto da: Marc
Exact Replacement for mercury 3.0
An exact replacement for my 2008 Tahoe Q4 with the mercury 3.0. Boat was idling rough. Switched out distributor cap, spark plugs and wires. Runs like clockwork with the new parts.
Scritto da: Patrick Lopez
Careful
Make sure it is seated properly, and there isn’t any plastic remaining from mold before placing. But overall fit as expected
Scritto da: Flynmonkey5
Good replacement.
Perfect replacement for my worn distributor cap on my boat, rotor fit with no issues.
Scritto da: Amazon Customer
Met all our expectations! Thanks!
Very pleased!
Scritto da: Wabalac
Perfect fit!
Distributor cap and rotor are critical ignition parts. For the DYI’s out there, warm the rotor with a hairdryer or hot water for easy install.
Scritto da: Amazon Customer
Great product
Great fit. To bad they delivered it to the wrong house.
Scritto da: Geoff F.
3.0l Merc
Perfect replacement for 3.0l Merc
Scritto da: Genny Dubuc
Parfait
Sur un Bayliner 2014 3L
Scritto da: kevin
#1
worked on glastron ssv 175 mercruiser 3.0l just what i needed

Produkty powiązane

hot
Mocowanie zbiornika rtęci Attwood 8899LP6
3.4/5

zł 178.97

Mocowanie zbiornika rtęci Attwood 8899LP6
3.4/5

zł 178.97

Odkryj naszą międzynarodową sieć

Wysyłamy do 28 krajów, ponad 200 000 produktów. Bądź na bieżąco, zapisz się do newslettera.

Array