Yes4All Regulowany uchwyt do hantli / Prosta sztanga / Miotacz ramion na 1 żeliwne obciążniki z kołnierzami Ładowane hantle (pary i pojedyncze) Chromowane złącze Złącze

Brand:Yes4All

3.6/5

188.17

Nasz Accent Snapback to strukturalna czapka wykonana w 100% z akrylu. Ta czapka ma kontrastowy kolor pod daszkiem, oczkami, górnym guzikiem i plastikowym zamknięciem. Ta czapka ma zintegrowany bawełniany potnik, otwory wentylacyjne, 8 rzędów szwów w poprzek płaskiego daszka i jest wykończona plastikowym zapięciem typu snapback.

MOLETOWANA POWIERZCHNIA: Rękojeść złącza jest radełkowana dla lepszego chwytu i dodatkowego bezpieczeństwa podczas ćwiczeń, a także łatwej instalacji i demontażu, styl może się różnić lub wygląd może się różnić. STAL CHROMOWANA: Wykonane z litej stali z chromowanym wykończeniem, nasze złącze hantli będzie działać przez długi czas, zachowując najwyższą wydajność. KOMPATYBILNY Z PRĘTAMI 1-CALOWYMI: Pasuje do hantli typu spin-lock o średnicy 1”, umożliwiając wybór prętów pasujących do łączników i odwrotnie. 11 DODATKOWYCH CALI: Złącze hantli Yes4All o długości 11,75 cala pomaga dodać więcej wyzwań do treningu. INNOWACYJNY PROJEKT: Pomaga łatwo i szybko zamienić dwa hantle w jeden sztangę w zaledwie kilka sekund, zapewniając urozmaicenie rutyny treningowej.
Brand Yes4All
Finish Type Chrome
Grip Size 1 inches
Grip Type Knurled
Item Dimensions LxWxH 11.75 x 1.18 x 1.18 inches
Item Weight 1 Kilograms
Material Chrome
Sleeve Length 11.75 Inches

3.6

13 Review
5 Star
74
4 Star
14
3 Star
5
2 Star
2
1 Star
5

Napisz recenzję

Twój e-mail nie zostanie opublikowany. Wszystkie pola obowiązkowe są oznaczone symbolem*

Scritto da: dsilvr
Somewhat decent, hopefully I don’t break these
These have more aggressive knurling than a typical pair of handles, and they’re somewhat heavy duty. They’re around 5 pounds each. I’ve broken the cheap cap handles, and I’d say these also have the potential to damage a thread when you drop them with around 70 pounds on each. One bad thing about these is that they are shorter than the three other pairs of handles that I own. About a half cm shorter. I can’t load these past 60 pounds with my current plate lineup. If you have the thinner plates you should be able to load 80 on these without much concern.
Scritto da: Mike Mac
Quality & Value
I've ordered two sets of these now and they work well. One real plus for me is that the collars stay snug once I have tightened them I've had other dumbell handles where the collars loosen while doing reps. Not good. These stay snug. And the price was great. Will likely buy again.
Scritto da: baldwin
Valuable
Quality and cheap above my expectation.
Scritto da: Alex G
Cost effective but oily
Good value for money but these things showed up in an oil stained box, all pieces oily to the touch, presumably residue from the manufacturing process. I'm going to have to wash the parts in soapy water before using them to workout.
Scritto da: Robert C.
No rubber coating to flake off.
These are a half pound heavier than my old set were the rubber on the handle cracked and flaked off after about 4 years. These are rock solid and look good too.
Scritto da: kevin
Nice build, washers are hard plastic
I really like these but the hard plastic washers are junk. They deform after only a few uses causing the weight to loosen ( note weights do not fall off) I replaced them with rubber washers, all good
Scritto da: Jay
Nice dumbbell handles
Product as described, solid steel handles & end clips. I got the black handle/red clip combo. There’s at least one other option (silver). Priced fair, would buy again ????????
Scritto da: AEC
Nice
Solid quality pair of dumbbells. I use them for my heavier weight dumbbell efforts as the screw thread collars just hold better than others I have, especially compared to the smooth, clamp collar dumbbells. Those are quicker to change out but I keep it lighter as they tend to slowly slide as weight presses hard. These are more confidence inspiring as you raise heavy wight over your face! Seems very well built and hope they will last a long time. They were delivered well packaged and in good time.
Scritto da: Amazon Customer
Good seller
Solid bar, nice looking well fit my existing dumbbell shipping on time
Scritto da: MAXSTUFF
Tres beau
Beau solide et tres pratique
Scritto da: MR B M LOGAN
Poor fit
I noticed there was only 1 available. When delivered this product was clearly unpacked and resealed over and over again. It doesn't fit either my standard spin lock or 1 inch spin lock barbells. It is either too small for standard bars or slides off the 1 inch bars. Dangerous and a waste of time. If there is only one available it will be my return. The bubble wrap will be damaged and will have my initials BML on the bubble wrap. See how long they recycle this over and over?
Scritto da: RALPH
Good dumbbell set for the money and ease of use
The quality of the product overall is good and the value for the dumbbells was great. One negative, is the screw on clamps do spin lose fairly easily. If you keep an eye on that, and is is easy to screw tight again.
Scritto da: Vurt
Doesn't fit 1", slips off
I bought the adapter bar descibed as fitting 1" dumbell bars, after measuring my dumbells which are 1". The adapter screws in but felt a bit loose. I gave it a pull and it slides straight off, leaving my dumbell bar scratched. Very dangerous. It's clearly just a bad fit, as its not loose enough to be meant for a different size than 1", its only a few mil out.

Produkty powiązane

hot

Odkryj naszą międzynarodową sieć

Wysyłamy do 28 krajów, ponad 200 000 produktów. Bądź na bieżąco, zapisz się do newslettera.

Array