Winters 2-calowy rozmiar tarczy, wielofunkcyjny ekonomiczny manometr do pracy na sucho, mosiężne elementy wewnętrzne, czarna stalowa obudowa, podwójna skala 0-100 psi/kPa, dokładność 3-2-3%, mocowanie dolne 1/4 cala NPT, manometr 0/ 100 PSI/KPA

Name: Winters 2-calowy rozmiar tarczy, wielofunkcyjny ekonomiczny manometr do pracy na sucho, mosiężne elementy wewnętrzne, czarna stalowa obudowa, podwójna skala 0-100 psi/kPa, dokładność 3-2-3%, mocowanie dolne 1/4 cala NPT, manometr 0/ 100 PSI/KPA
Brand: Winters Instruments
SKU: 0628311200454
Price: 164.27 PLN
Availability: InStock

Brand:Winters Instruments

3.6/5

zł
164.27

SZCZEGÓŁY PRODUKTU: Wariant: manometr PEM Economy. Rozmiar tarczy: 2 (50 mm.) Wymiar: 3 x 2 x 1,2 cala. Dokładność: +/- 3-2-3%. Materiał: brąz i mosiądz. Koperta: Stal malowana na czarno. Do niezatykających się i niekorodujących mediów. DOKŁADNY WYNIK: Dokładność wyświetlania wynosi + lub - 3/2/3% w całym zakresie miernika (ASME B40.100 klasa B) i ma złącze męskie 1/4 cala NPT w dolnym uchwycie. Idealne dopasowanie bez wycieków i łatwe do odczytania. WYTRZYMAŁY I CERTYFIKAT IP52: Ta okrągła tarcza jest zamknięta w stalowej obudowie w celu ochrony środowiska i posiada certyfikat IP52 dla ochrony przed kurzem lub płynami. Ten manometr został zbudowany z myślą o trwałości, więc możesz na nim polegać, gdy ciśnienie wzrośnie. WSKAŹNIK PODWÓJNEJ SKALI: Ten manometr jest wyposażony w manometr z podwójną skalą 0-15 psi/kPa i można go zainstalować w dowolnym miejscu obwodu, aby łatwo mierzyć ciśnienie w dowolnym punkcie. Z soczewką akrylową zapewniającą maksymalną przejrzystość, zapewniając zawsze dokładne i wyraźne odczyty. SUCHY MIERNIK CIŚNIENIA: Upewnij się, że Twoja maszyna działa z najwyższą wydajnością! Ten manometr wykonany jest z mosiężnych części zwilżanych do pomiaru niekorozyjnego ciśnienia cieczy i gazu. Doskonały do systemów HVAC, pneumatycznych, hydraulicznych, sprężarek powietrza i innych.

Brak dostępnych jednostek

EAN: 0628311200454

Kategorie Przemysłowe i naukowe, Testuj, mierz i sprawdzaj, Ciśnienie i próżnia, Manometry i podciśnienie, Manometry,

Brand	Winters Instruments
Country of Origin	China
Domestic Shipping	Currently, item can be shipped only within the U.S. and to APO/FPO addresses. For APO/FPO shipments, please check with the manufacturer regarding warranty and support issues.
International Shipping	This item can be shipped to select countries outside of the U.S.
Is Discontinued By Manufacturer	No
Item model number	PEM202
Item Weight	0.22 Pounds
Manufacturer	Winters
Material	Steel
Package Dimensions	3.5 x 2.48 x 1.46 inches; 3.52 Ounces

5 Star

4 Star

3 Star

2 Star

1 Star

Napisz recenzję

Twój e-mail nie zostanie opublikowany. Wszystkie pola obowiązkowe są oznaczone symbolem^*

Twoja ocena

Scritto da: Amazon Customer

Gauges

Arrived on time, works as expected.

Scritto da: Amazon Customer

Works great

Works great and is of good quality.

Scritto da: Frederick Ward

Seems to work well

Useful to my needs

Scritto da: vicki wysong

great buy

great buy

Scritto da: FlyboyTR

First One Defective...Replacement Is Perfect

When my first one arrived, it was showing 7 PSI out of the box. I did not even connect it. I contacted Amazon for a replacement. This is being used in an assembly that allows me to air up/down two tires at a time. We do off-roading and the ability to air up/down two tires at a time is a good thing. It also allows me to balance the pressure between the two tires. I also have the ability to check the line pressure with a regular tire gauge (just a back up). I have one electronic and two manual tire gauges that I use. All three of these read exactly the same at 40-65 PSI. The replacement gauge arrived two days later. It was at 0 PSI out of the box. I installed it and started checking...thinking a gauge at this price point would be way off. Actually what I found after testing it with my three tire gauges was impressive. At 40 PSI and below it reads about 1 PSI low. At 50-65 it reads exact to about 1/2 PSI high. I have used high-end, expensive, oil filled gauges that were no where this accurate. Bottom line...I am very pleased with the replacement and glad that I decided to stay with the same brand/seller, etc. Thanks!

Scritto da: HappyDayze

For pressure readings it works very well.

Easy to read. No vibration of needle... Very accurate!

Scritto da: Albatross

It's good value for the money

I purchased three gauges to install on a water filtration system. After about a month, one failed. The failure was related to the needle "sticking" rather than a smooth movement during operation. I emailed the company directly, who informed me to go through Amazon for returns/rrplacement/warranty. I don't know what that says about the company, but I guess they don't want to deal with customers directly. Either way it's easy to install, the accuracy is about +/- 5% from what I can measure. The two working ones are smooth and easy to read. One part that I'm not too happy with is the two screws in the back are not stainless steel nor are they protected. So one of them somehow had water splashed in the and the screws are show rust after a month of usage. Didn't expect water tight Gauge, but also didn't expext rust from Gauge that is designed to measure water pressure as well.

Scritto da: Shane

Ehh

Might have just got a bad gauge. It was not reading correct pressure. Other than that it seems like a nice gauge. Simple and easy to use. If only mine had worked as intended.