Wiertło Irwin Tools-87920, 1-1/4 cala, srebrne

Name: Wiertło Irwin Tools-87920, 1-1/4 cala, srebrne
Brand: Irwin Tools
SKU: 0024721879202
Price: 137.03 PLN
Availability: InStock

Brand:Irwin Tools

3.5/5

zł
137.03

Ta antyczna reprodukcja, zainspirowana francuskim korynckim dziełem z XX wieku, ma ten sam wspaniały, złocony kształt na schodkowej podstawie. Kolumna jest ręcznie malowana na czarno i wykończona owijką z antycznych złotych liści laurowych i zwieńczona białym bawełnianym abażurem. Choć inspirowany wczorajszymi latami, ma wszystkie nowoczesne wykończenia, kompatybilność z diodami LED, jedwabne przewody i certyfikat UL w zakresie bezpieczeństwa.

Kwota

Dodaj do koszyka Kup Teraz

EAN: 0024721879202

Kategorie Narzędzia i ulepszenia domu, Narzędzia elektryczne i ręczne, Części i akcesoria do elektronarzędzi, Części i akcesoria do wiertarek elektrycznych, Wiertła, Wiertła łopatkowe,

Zrobione ze stali. Cięcie elektryczne i piłowanie. Kraj producenta: Chiny. Wymiary opakowania: 4,572 L x 0,254 H x 12,192 W (centymetry).

Brand	Irwin Tools
Department	Unisex-Adult
Is Discontinued By Manufacturer	No
Item Dimensions LxWxH	7.2 x 6.8 x 0.3 inches
Item model number	87920
Manufacturer	Irwin
Material	Blend
Product Dimensions	7.2 x 6.8 x 0.3 inches; 1.6 Ounces
Shank Type	Hex
Tool Flute Type	Spiral

5 Star

4 Star

3 Star

2 Star

1 Star

Napisz recenzję

Twój e-mail nie zostanie opublikowany. Wszystkie pola obowiązkowe są oznaczone symbolem^*

Twoja ocena

Scritto da: Mike

Use low rpm

This was the size hole I needed for my rain barrel bulkhead fitting. It worked well enough to drill it but I went a little too fast and it marred the outer edges of the hole. Luckily no leaks. If used correctly a great tool to have.

Scritto da: DALE WRAZEN

Great

Worked great for our project

Scritto da: Tony G

Works great

It does the job but the corners are not sharp like shown in the picture. Dont know if it makes a difference in performance.

Scritto da: Jeremy L.

Great drill 1-1/4" bit

I purchased 3 of these 1-1/4" bits for my angle drill to drill wire holes through my basement ceiling floor joists. They were idea due to the short shank. I drilled 62 holes through 2×12 pine floor joists. I had purchased 3 of these bits, only ended using 1. Even after drilling the last hole, the bit still remained just ast sharp as the first hole. Definitely worth the price.

Scritto da: Carlin

It works

I needed this for one project and it worked great then I gave to my neighbor to use

Scritto da: Michael D Burgi

Doesn't look like photo

Correct bit but doesn't look like the photo. The Sides of the cutting part are angled down. They don't come to a spike like in the picture. Still works but wanted that extra cutting part.

Scritto da: Amazon Customer

Great bit

For those who stated that this bit can’t drill a straight hole, I completely disagree. I drilled through a couple of clamped 2 by 4’s (with an impact driver). The result was perfect. I then inserted a 11/4” dowel through, which fit perfectly. Great value too!

Scritto da: B Rod

Product not as shown

Irwin makes great tools. However, for some reason, they removed the scoring spikes on the outside edge of the spade bit that are shown in this item's picture. The spikes make a nice clean edge to the hole. It is possible that the new design will work just as well. The important thing is that the item I received does not match the picture. I ordered this item specifically because the spikes were shown. I can buy the spade bit without the spikes at my local hardware store. I am returning the bit that I got. Update your picture.