Westinghouse Lighting 6790100 Mocowanie na cokół do latarni słupowej, teksturowane czarne wykończenie na odlewie aluminiowym

Brand:Westinghouse

3.1/5

203.62

Nowy PrimeChime Plus 2 (PRCP2) firmy NICOR łączy teraz wszystkie popularne funkcje oryginalnego PrimeChime Plus z rozszerzoną kompatybilnością z inteligentnym domowym wideodomofonem (zobacz listę kompatybilności). PrimeChime Plus 2 łączy napięcie sieciowe i niskie napięcie w jednym urządzeniu z wbudowanym transformatorem. Dzięki temu instalacja jest przejrzysta i prosta. Wbudowana piasta z dzwonkiem ma matową białą, zatrzaskową płytę czołową, którą można pomalować, aby uzyskać naprawdę spersonalizowany wygląd pasujący do wnętrza domu. PrimeChime Plus 2 można podłączyć do dwóch oddzielnych drzwi, z których każde ma swój indywidualny dźwięk dzwonka, dzięki czemu zawsze wiesz, które drzwi otworzyć. Masz więcej wejść? Dwie jednostki można połączyć (łańcuchowo), aby pokryć dodatkowe otwory drzwiowe i zapewnić dodatkowe pokrycie dźwiękiem w większych domach. Ten zestaw PrimeChime Plus 2 zawiera jeden ozdobny przycisk i dwa standardowe przyciski (wszystkie podświetlone). Dostępne są również dodatkowe ozdobne i stiukowe guziki w różnych kolorach, aby dopasować je do zewnętrznej części domu. Ten zestaw zawiera elementy montażowe, instrukcje instalacji i roczną gwarancję.

3-1/8 na 5-5/8 cala (wys. x szer.) z łącznikiem o średnicy 3 cali. Karbowane akcenty dodają tradycyjnego stylu. Sparuj z dowolną zewnętrzną latarnią na szczycie słupa (brak w zestawie) i zainstaluj na cokołach, kamiennych ścianach lub innych poziomych powierzchniach. Odlewany aluminiowy uchwyt na cokół z teksturowanym czarnym wykończeniem.
Assembled Diameter ‎3 Inches
Batteries Required? ‎No
Brand Westinghouse
Brand ‎Westinghouse
Country of Origin ‎China
Customer Reviews 4.0 4.0 out of 5 stars 89 ratings 4.0 out of 5 stars
Cutting Diameter ‎3 Inches
Domestic Shipping Item can be shipped within U.S.
Finish ‎Textured Black
Finish Type Textured Black
Finish Type ‎Textured Black
International Shipping This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer ‎No
Item model number ‎6790100
Item Package Quantity ‎1
Item Weight ‎7.4 ounces
Manufacturer ‎Westinghouse
Material Cast Aluminum
Material ‎Cast Aluminum
Mounting Type ‎Wall Mount
Number Of Pieces 1
Number Of Pieces ‎1
Part Number ‎6790100
Product Dimensions ‎6.12 x 6.12 x 3.11 inches
Style ‎Traditional
Theme Wedding
Theme ‎Wedding

3.1

9 Review
5 Star
59
4 Star
12
3 Star
12
2 Star
9
1 Star
9

Napisz recenzję

Twój e-mail nie zostanie opublikowany. Wszystkie pola obowiązkowe są oznaczone symbolem*

Scritto da: Elizabeth Criscuoli
Sturdy, but.....
Did not like that the screws rusted very quickly.
Scritto da: Franklin H.
Made of metal which is a plus, but thin.
This item has a very clean finish to it. Hey has a very nice look to go with your lamps. They only reason I gave it four stars is because the metal is very thin and when I was mounting edit, the metal cracked due to tightness.
Scritto da: 2m25
It's OK
I bought a pair. The only negative is the screws it came with rusted within days. I had to buy better screws from the hardware store.
Scritto da: Jonella
Just what we needed to secure our outdoor lanterns
We Purchased 2 solar pole lamps to mount on our entry wall to replace a set of electric lanterns that had been there for years. These pedestal mounts are perfect for covering the existing holes where the electric wires came thru for the previous lights. These pedestal mounts fit our new light bases perfectly and has made a very nice clean looking light setup in our front entry.
Scritto da: Kirby Leon
Not very good.
I regret this purchase. Too clumsy for me.
Scritto da: MG
Westinghouse Lighting 6790100 Pedestal Mount
Well built, great delivery time.
Scritto da: kl_olsen
Is not a 3" post base. Actual diameter is more like 2 13/16" or 2 7/8".
It is not a 3" post base. The description says with 3" diameter fitter. That is not the case. It is more like 2 13/16” or 2 7/8" not a full 3". My post light takes a 3" post and this post base fits sloppy. Do not buy if your lamp takes a full 3" post and you want a tight fit like it should. If your using a length of post between the lamp and the base and not placing the lamp directly on it, which is the primary use for these then it should work. I live outside of town where my Lowes and HomeDepot are. When I get to town to buy one, I will update on which brand I bought that is similar to this style. After looking at more listings, I believe this is a full 3” like it should be: https://www.amazon.com/Trans-Globe-Lighting-100-BK/dp/B000VB8RC6/ref=sr_1_3?ie=UTF8&qid=1534632072&sr=8-3&keywords=post+lamp+base I don’t know if I’ll order it or just find one at Lowe’s. Update: Picked one up at Lowe’s and it is the right diameter- Portfolio Matte Black 3.15-in Pier Light Mount Item # 358617 Model # PB-01MBK
Scritto da: Karl sessler
They are 5 1/2 by 5 1/2 wide inside measurements
Metal and fits my lights great
Scritto da: John
Too flimsy.
Used it for supporting a post lamp, it is a friction fit and it cracked after just a couple taps with the hammer and block of wood. Now I have too start from scratch again. Would not recommend using this. Just doubled checked the OD of this mount, it is 2” 15/16, which is almost the same as the ID of the post that was supplied. What is the next step?

Produkty powiązane

hot
Classy Caps Adapter PCA433, 3,5 x 3,5
3.1/5

zł 118.06

Classy Caps Adapter PCA433, 3,5 x 3,5
3.1/5

zł 118.06

Odkryj naszą międzynarodową sieć

Wysyłamy do 28 krajów, ponad 200 000 produktów. Bądź na bieżąco, zapisz się do newslettera.

Array