Superior Tool 18912 Szczotka do czyszczenia rur 1/2 Power, jeden rozmiar, jak pokazano na rysunku

Name: Superior Tool 18912 Szczotka do czyszczenia rur 1/2 Power, jeden rozmiar, jak pokazano na rysunku
Brand: Superior Tool
SKU: 0017197189128
Price: 134.98 PLN
Availability: InStock

Brand:Superior Tool

2.7/5

zł
134.98

Bloki przeciwbryzgowe RainRun (kolor brązowy) chronią trawniki, ogrody i fundamenty, zatrzymując spływającą wodę na swoim miejscu. To doskonały sposób na kierowanie wody tam, gdzie chcesz. Wykonany z wytrzymałego formowanego plastiku. Zapobiega uszkodzeniom spowodowanym erozją i chroni ozdobne elementy krajobrazu. Inne zalety produktu RainRun obejmują: Odporność na skrajne temperatury, nie pęka ani nie rozkłada się, Kieruje wodę z dala od fundamentów, aby pomóc chronić przed wyciekami i pęknięciami, Łatwość przenoszenia i zmiany położenia oraz wtapia się w trawniki na zewnątrz domu i krajobrazy ogrodowe.

Kwota

Dodaj do koszyka Kup Teraz

EAN: 0017197189128

Kategorie Przemysłowe i naukowe, Produkty ścierne i wykończeniowe, Szczotki ścierne, Druciane koła i szczotki, Pędzle spiralne,

Chwyt sześciokątny 1/4 cala. Może być używany ze zwykłymi uchwytami na klucz, adapterami uchwytów i uchwytami bezkluczowymi. Idealny do projektów wymagających wielu łączników lutowanych lub lutowanych. Szczoteczka do czyszczenia rur zasilających.

Batteries Included?	‎No
Batteries Required?	‎No
Brand	Superior Tool
Bristle Type	Crimped Wire
Color	As shown in the image
Color	‎As shown in the image
Country of Origin	‎China
Customer Reviews	3.7 3.7 out of 5 stars 677 ratings 3.7 out of 5 stars
Domestic Shipping	Item can be shipped within U.S.
Handle Material	‎Plastic
Included Components	‎1/2" Power Tube Cleaning Brush
International Shipping	This item can be shipped to select countries outside of the U.S. Learn More
Item Dimensions LxWxH	2.2 x 3.29 x 7.5 inches
Item model number	‎18912
Item Package Quantity	‎1
Item Weight	‎1.76 ounces
Manufacturer	‎Superior Tool
Material	Blend
Material	‎Blend
Number Of Pieces	‎1
Part Number	‎CHH-18912
Product Dimensions	‎2.2 x 3.29 x 7.5 inches
Size	‎One Size

5 Star

4 Star

3 Star

2 Star

1 Star

Napisz recenzję

Twój e-mail nie zostanie opublikowany. Wszystkie pola obowiązkowe są oznaczone symbolem^*

Twoja ocena

Scritto da: D. Means

Works great; breaks easily

Be careful: do no use high torque drill. It grabbed hard onto the pipe, and my drill torque setting was too high. The tool broke on the first use.

Scritto da: victor

Very good idea,very poorly executed ,ui had to ad a couple of washers after it broked, .

I didnt like is so poorly made

Scritto da: Hector Jr. Delgado

Buenísima herramienta

Está herramienta me a salido muy buena y resistente ya que la de 3/4" no, pero está le doy 5 que es el máximo aquí sino le daba 10

Scritto da: Alex

Great product if used correctly

The product seems thin and easy to break, I went through and read the review and I didn't want to purchase it, but I figured it might be user error for the most part. Using the review I stopped myself from using it on an impact drill. I used mine on a regular drill and I don't have a problem with it. Works great, purchased another one and bought the three piece hand set. Been using them for over a month now and I still don't have a problem with them. Even though the product seems cheap, I dont think I can go back to sand cloth. Saves so much time and I will continue to purchase more when I need them.

Scritto da: Eric M.

Absolute garbage!

Didn't even clean one fitting before it broke. Literally, lasted 7 seconds before it broke! Absolute garbage. Waist of time and money. Can't imagine how this company could even sell such a terrible product.

Scritto da: Jonathan

Don't throwaway your sanding cloth just yet

The power tube cleaning brush does a great job with new copper, quick and easy. This only issue I have is working with older used pipes. We all know that old solder can be a pain to remove, so don't throw away your sanding cloth yet. Will continue to use and I'm glad I purchased as it does save a lot of time over cleaning every pipe by hand.

Scritto da: SeanD

epoxy the "breaky points" first

I bought this product with a little risk as I saw a lot of other reviews complaining about if breaking under torque so I made sure just to put a little epoxy (I use JB weld but you could use whatever) around the spindle to housing.... basically the whole exterior back side, before using and it's been wonderful for the last 6 weeks. Definitely past the break even point and worth it.

Scritto da: Brendan Tighe

Would not recommend

I used this 2 times, the second time it came apart and broke. It did a great job when it worked, but I have only had it for 2 days and it's now garbage. Update I put red lock tight on the entire piece, see pic. Seems to be what this tool needs.

Scritto da: Georgia G

Broke on first use. Plastic separated from drill bit

Broke on the first use. Wouldn’t recommend wasting your money on this product.

Scritto da: BarnDog

Broke in first few uses--nut sheared through plastic

This item broke in first couple of uses. I did not return it, but have used it by hand, really defeats the purpose. I would not recommend this product.

Scritto da: Tom

Plastic casing cracked open on first use

Looks like a very useful tool, but on the very first use it somehow "jammed" on the pipe (yes, I did rotate it in the right, clockwise direction), and the plastic casing simply cracked open under the resulting torque from the drill. The 1/4" bit is now at an angle from the casing. I can sort of still use it manually, but not with my drill (it wobbles a lot, and would likely break open what is left of the plastic casing). Very expensive for a single use (!), I'm back to elbow grease.

Scritto da: Martian

Last very short

Useful but They break and wear out very fast , I try couple times with the same results , if they ever make a better quality one im in.

Scritto da: Amazon Customer

broke on the first use

the part secured onto the shank is too weak and it broke on first use. the shank torn open the tool and came off. it is even worse because the shank stuck in the impact drill and now i can not use my drill! didn't get a chance to try the 3/4" one yet but not expecting any good result from it.