Orbit DripMaster 65721 6-calowy kołek do węży, 10 sztuk

Brand:Orbit

3.4/5

103.03

Od producentaOrbit to wiodąca firma w Ameryce Północnej w zakresie nawadniania mieszkań. Dzięki obecności w ponad 180 krajach i na 6 kontynentach oferujemy najbardziej kompletny ekosystem rozwiązań w zakresie kranów do węży, węży, końcówek węży, podziemnych, kapania, mgły i ochrony podwórka. Od ponad pół wieku jesteśmy liderem branży w zakresie innowacyjnych rozwiązań, gromadząc ponad 100 aktywnych patentów i wiele branżowych nagród uznaniowych. Od PVC-Lock, Blu-Lock i Drip-Lock, które są niezwykle szybkim sposobem łączenia rur tryskaczowych i kroplowych, po nasze zaawansowane technologicznie, najlepiej sprzedające się inteligentne sterowniki B-hyve, zmodernizowaliśmy branżę, wyznaczyliśmy standard najlepszych praktyk w zakresie nawadniania budynków mieszkalnych i sprawił, że podlewanie na zewnątrz było wydajne w gospodarstwach domowych na całym świecie. Hydro-Rain to najnowocześniejszy komercyjny i rolniczy odpowiednik Orbit, obejmujący oferty BUILT FOR SPEED, które zostały zaprojektowane specjalnie dla profesjonalnych usługodawców i hodowców. Orbit i Hydro-Rain tworzą razem jednostkę biznesową w ramach dywizji Gardena Grupy Husqvarna, która wspólnie obejmuje największego na świecie producenta urządzeń do nawadniania domów. Ponieważ zapewnienie społecznościom dostępu do bezpiecznej słodkiej wody jest globalnym priorytetem, z dumą potwierdzamy nasze zaangażowanie w dostarczanie kompleksowego ekosystemu inteligentnych rozwiązań, obejmującego zastosowania OD KRANU DO GOSPODARSTWA, ponieważ nieustannie realizujemy wizję ZMIANY SPOSOBÓW ŚWIATOWYCH WÓD .

Do użytku na zewnątrz tylko z zimną wodą. Trwała konstrukcja zapewnia lata niezawodnego użytkowania. Współpracuje ze wszystkimi systemami kropelkowymi. Współpracuje ze wszystkimi markami rurek kroplowych 1/2 cala. Służy do trzymania rurek 1/4 cala i kroplowników na żądanej wysokości.
Brand Orbit
Color Blacks
Country of Origin Taiwan
Customer Reviews 4.3 4.3 out of 5 stars 20 ratings 4.3 out of 5 stars
Is Discontinued By Manufacturer No
Item Dimensions LxWxH 0.7 x 3.5 x 8.5 inches
Item model number 65721
Item Weight 0.01 Ounces
Manufacturer Orbit
Material Wood,Plastic
Number of Pieces 10
Product Dimensions 0.7 x 3.5 x 8.5 inches
Style Flat Top

3.4

9 Review
5 Star
52
4 Star
28
3 Star
20
2 Star
0
1 Star
0

Napisz recenzję

Twój e-mail nie zostanie opublikowany. Wszystkie pola obowiązkowe są oznaczone symbolem*

Scritto da: BG
Not As The Picture Implies
I received a packet of the stakes on the left in the product photo and nothing more. I am not sure why the picture shows 3 different kinds. I have about 20 of the stakes already on hand but they do not work very well as the drip line is constantly slipping out. I was disappointed to receive 10 more of something I already have, dislike, and was trying to replace. I am sure I can find a use for them. I actually do use them to hold plants upright in containers if they begin to lean. These do a poor job of holding the drip tubing in my honest opinion. + Inexpensive + Several Uses - Not as the Picture Implies - Do not hold the drip tubing well _Bottom Line_ No, I would not recommend these to a friend for use on drip lines. There are other similar stakes that have a cap on top that hold the drip tubing in place and those work great. I will not buy these again.
Scritto da: todderick
Not the product shown at center in photo.
Please note that the product sent will NOT be the tubing riser / sprinkler stake shown most prominently in the photo attached, but rather the small clip/stake shown in the left of the photo. I intended to order the stake shown to add more sprinklers to my system, but instead received stakes that I already have. Not that I can't use them, but I was kind of hoping to add sprinklers, not tie down the ones that I already have. The stakes are nice, I've used them elsewhere in my system and they work very well, but be sure you realize what you are ordering.
Scritto da: kdogg
Not as pictured but still good value
I knew that based on other reviews it would only be the clip pictured on the left. The pricing was good so I purchased and got exactly that.
Scritto da: Lianimals
Very good product and fairly-priced.
These stakes were designed a bit different from the 1/4" tubeing stakes I've used before so I wasn't sure I'd like the performance but they actually hold drip tubing and 1/4" line very snugly and the plastic seems pliable and not brittle like other "cheap" plastics. For the price, this is an excellent product.
Scritto da: Ted Cook
Not what I Expected :(
I was looking for something for a soaker hose to keep it off the dirt, put it in the search engine as Soaker hose drip Stakes and this was the first finding for it. They are to small and a soaker hose does not fit even in the top. But I made them work, cut one top off and glue 2 together. but they are flimsy. They bend to easily! These type are for small tubes for like Fish tanks and so on. For 50 of them it was an ok price that is why I gave that a 3 star rating.
Scritto da: Buddy Guy
Yeah man, they're good.
They hold the hoses tight. I don't understand the issues people had with them. I guess some people just aren't bright enough to know how to use a stake.
Scritto da: pamalama
I find these work better than other types of 1/4" tubing holders
I find these work better than other types of 1/4" tubing holders. Give the prongs a little twist to get the tubing down to a more secure hold.
Scritto da: tad
Four Stars
good
Scritto da: Devoy
Holds the irrigation perfect
It works how it’s designed

Produkty powiązane

Odkryj naszą międzynarodową sieć

Wysyłamy do 28 krajów, ponad 200 000 produktów. Bądź na bieżąco, zapisz się do newslettera.

Array