GEARWRENCH Uniwersalny uchwyt koła pasowego - 3900 15 cali

Brand:GEARWRENCH

3.6/5

302.50

GearWrench wprowadził oryginalny, opatentowany pięciostopniowy klucz zapadkowy w 1996 roku i szybko stał się popularną marką profesjonalnych techników samochodowych. Innowacje na tym się nie skończyły. Z roku na rok marka GearWrench rozszerza swoją gamę narzędzi z grzechotką i nie tylko, aby pomóc technikom motoryzacyjnym i przemysłowym w szybszym i łatwiejszym wykonywaniu pracy. Posiadanie odpowiedniego narzędzia do pracy ma kluczowe znaczenie, a technicy pracujący w ciasnych przestrzeniach lepiej niż ktokolwiek rozumieją siłę tego prostego stwierdzenia. Ta szeroka gama jest podstawą, dzięki której GearWrench zyskał reputację dzięki niespotykanej szybkości, sile i dostępowi. Rezultatem jest zwiększona produktywność tych, którzy trzymają narzędzia GearWrench w swoim pudełku.

Silniki GM Trucks W/4,3-L, 5,0-L i 5,7-L. Silniki Dodge Trucks W/3,9-L, 5,2-L, 5,9-L, 8,0-L i V10. Zastosowania do demontażu sprzęgła wentylatora obejmują: silniki Ford Trucks W/2,8-L, 2,9-L, 3,0-L, 4,0-L, 4,9-L i 5,0-L. W połączeniu z kluczami do sprzęgła wentylatora jest szczególnie przydatny przy demontażu i wymianie zespołów wentylatorów termostatycznych. Unikalne narzędzie oszczędzające czas jest przeznaczone do chwytania i przytrzymywania przykręcanych kół pasowych za pomocą śrub mocujących w większości zastosowań.
Batteries Included? ‎No
Batteries Required? ‎No
Customer Reviews 4.6 4.6 out of 5 stars 718 ratings 4.6 out of 5 stars
Is Discontinued By Manufacturer ‎No
Item model number ‎3900
Item Package Quantity ‎1
Item Weight ‎1.5 pounds
Manufacturer ‎GEARWRENCH
Measurement System ‎English/Standard
Number of Handles ‎1
Part Number ‎3900
Product Dimensions ‎15 x 4 x 0.5 inches
Size ‎15 Inch

3.6

13 Review
5 Star
75
4 Star
14
3 Star
6
2 Star
2
1 Star
3

Napisz recenzję

Twój e-mail nie zostanie opublikowany. Wszystkie pola obowiązkowe są oznaczone symbolem*

Scritto da: Amazon Customer
It’s just a tool
It’s just a toolRepeat a bit too much for this as when you see what it is they charged a bit too much but I just figured if it makes one job easier I can get it done and not bust my back on it
Scritto da: Kenneth Guined
Water pump pully tool
Works as it should
Scritto da: tdsails
Awesome
If you are going to be changing a fan clutch, just go ahead and get this tool. Don't waste your time with all those snake oil ideas from youtube. I used it on my 2016 Ram 2500 with the Cummins 6.7. It easily hooked to the bolts on the radiator fan pulley and held while I used a 48mm wrench and a 16 ounce hammer (took about 3 good solid smacks) to break the nut free. The prep time to get to the nut took longer than getting it broke free and the fan clutch/fan off the motor. Product was well worth the money, even though (hopefully) I won't have to use it again for a very long time. It will save you some time, bloody knuckles and your sanity.
Scritto da: john lewis
Works
Pretty fiddly but works, I think the grooves/hooks could be deeper.
Scritto da: Adam
Mixed feelings
This is a must have to remove the fan clutch but it does slip of easy so you need to be careful. The wrench is very sturdy and you don’t half to worry about bending like cheap wrenches.
Scritto da: Big Baad Brad
Valuable for the removal of the fan clutch
It is fairly easy to use. The difference in the one I rented is that that one had a grooved locking mechanism and the problem with that is those grooves where most people used it wore out. The winning I find not so helpful on this one is that one of the hooks desert come all the way up to grab the bolt it goes around it but not completely or not like the other side does. In the end it didn't actually work for me because my fan clutch nut was unmovable we ended up cutting it off. But I do recommend the tool
Scritto da: Ruby
Shipped fast.
Not easy to use.
Scritto da: Louie Knives
It works
Worked like a charm on my 6.0 LS2. I tried the pneumatic kit but all that did was gouge the nut.
Scritto da: D. Rodríguez
Muy solida pero es mejorable.
Es algo pesada y solida, lo que es algo bueno, pero los pines que tiene para detener el pulley son bastante cortos. Deberían ser un poco más largos para que se puedan usar sin problemas, incluso si inclinas un poco la herramienta.
Scritto da: Jonathan Welch
Will work on a variety of pulleys
I recently used this tool to secure the pulley on a Chevy Trailblazer. The tool is simple to use and I can tell it will work on many different vehicle brands. For the money I think it is a good tool to have in your cabinet.
Scritto da: Michael Houle
Worked for me, but I had to modify the tool.
For my Dodge Dakota 2003, I actually had to hacksaw the tips off of this tool. It was just not going to work for me as is. Oh well, I was happy I got it to fit alongside my pipe wrench to get the nut free. I used this tool on the top side holes and then the pipe wrench fit nicely underneath. HTH.
Scritto da: kobebryan
Not Good!
Not Good!
Scritto da: Ken Johnson
Good product
Saves a lot of time and simple to use.

Produkty powiązane

Odkryj naszą międzynarodową sieć

Wysyłamy do 28 krajów, ponad 200 000 produktów. Bądź na bieżąco, zapisz się do newslettera.

Array