Firma kontrolna 4096 Miernik wilgotności/temperatury z identyfikowalną pamięcią, biały i czarny

Name: Firma kontrolna 4096 Miernik wilgotności/temperatury z identyfikowalną pamięcią, biały i czarny
Brand: Control Company
SKU: 0024140774607
Price: 557.98 PLN
Availability: InStock

Brand:Control Company

3.2/5

zł
557.98

Unikalny instrument pokazuje dokładne warunki powietrza w laboratoriach, okapach, pomieszczeniach czystych, chłodniach, magazynach, inkubatorach, komorach środowiskowych i obszarach przechowywania chemikaliów. Stale i jednocześnie wyświetla względną wilgotność i temperaturę w stopniach F/stopniach C z pamięcią podwójnego przywołania. Monitoruje warunki w nocy, w weekendy lub przez dowolny okres czasu. Szybka reakcja Czujniki półprzewodnikowe pokazują zmiany w mniej niż 30 sekund. Wyświetlacz jest aktualizowany raz na sekundę. Kalibracja wielopunktowa na podstawie indywidualnie numerowanego, identyfikowalnego certyfikatu, który zapewnia dokładność laboratorium kalibracyjnego ISO/IEC 17025:2005 (1750.01) akredytowanego przez A2LA. Wskazuje identyfikowalność pomiarów do jednostek Si za pośrednictwem NIST lub innych uznanych krajowych instytutów pomiarowych (nmi), które są sygnatariuszami umowy o wzajemnym uznawaniu cipm. Bardzo duży, łatwy do przeglądania 5/8 cala. Wysokie cyfry można odczytać jednym spojrzeniem z odległości nawet 6 metrów. Spełnia federalne wymagania specyfikacji CLIA 493.1252 dotyczącej monitorowania temperatury i wilgotności. Niezależna, stabilna, dokładna jednostka nie wymaga regulacji ani konserwacji. Obudowa jest wykonana z odpornego na chemikalia i wstrząsy tworzywa ABS. Dostarczany z identyfikowalnym certyfikatem, uchwytem ściennym, stojakiem stołowym, przełącznikiem do odczytu stopnia F/stopnia C, szybko reagującymi czujnikami półprzewodnikowymi i dwiema bateriami AAA (bateria zapasowa, nr kat. 350-98596).

Kwota

Dodaj do koszyka Kup Teraz

EAN: 0024140774607

Kategorie Przemysłowe i naukowe, Urządzenia, Akcesoria do dużych urządzeń, Części i akcesoria do nawilżaczy, Mierniki wilgotności,

Waga opakowania produktu: 1,0 funta Wymiary opakowania produktu: 3,0 dł. x 1,0 szer. x 7,0 wys. Numer modelu: 4096. Zakres wilgotności: od 25 do 95%.

Batteries	2 AAA batteries required. (included)
Brand	Control
Color	White & Black
Is Discontinued By Manufacturer	No
Item Dimensions LxWxH	4.9 x 3 x 1 inches
Item model number	4096
Item Weight	2.5 Ounces
Manufacturer	Control Company
Mounting Type	Wall Mount
Product Dimensions	4.9 x 3 x 1 inches; 2.5 Ounces

5 Star

4 Star

3 Star

2 Star

1 Star

Napisz recenzję

Twój e-mail nie zostanie opublikowany. Wszystkie pola obowiązkowe są oznaczone symbolem^*

Twoja ocena

Scritto da: DinoD

Good little Unit

The Good: This unit comes with a Z540-1 traceable Cal Cert that was done at 24.0C and 45.0%RH. I compared it to another more expensive NIST Traceable unit in my lab and they agree almost perfectly. Instructions are easy enough but is not hard to figure out how to this unit without them. It comes with a tilt stand that is useable but it sets to a fairly low angle. This is a small unit but the display is very crisp and sharp and stays that way no matter what angle you view it from. It appears well built and solid. The not as Good: The included Cal Cert was already 6 months past issue. Be aware there is no decimal resolution on this unit, integers only for Temp and Humidity. This is likely OK for a lot of folks, but I want .1% resolution for my Calibration Reports. My one real complaint - to change the temperature readout from F to C you have to remove the tilt stand/battery compartment door to gain access to that switch. Very inconvenient. You could drill a small hole in the battery compartment door to get around this. This unit is well built and is priced nicely for one that has NIST traceability. However it does have its limitations so I have ordered another (more expensive) unit with .1% resolution and a front panel F/C switch. I like this one enough to keep it as a spare

Scritto da: Amazon Customer

Calibration due Apr 2023 - should have been closer to 2 years

Did not like the fact that it was dated due for calibration in Apr 2025. That is about 16 months from now and they require calibration/replacement every 2 years. Guess it was sitting on the shelf somewhere. Oh and it came turned on already so the batteries are probably half dead or it was a returned item for the same reason. The plastic piece was not in the battery holder that you pull out when you buy it. Maybe returned because of date code.

Scritto da: RCPH

Accurate, Stable, Sensitive

Nothing to dislike about this instrument as I have found it to respond within a minute or two to a new environment and it to be stable by giving me consistent readings and it has enough sensitivity. I am happy with the price when I think about how it works.

Scritto da: wefishnski

Great, with these exceptions

Great, with these exceptions: 1. Doesn't read humidity below 25%. In the lower end of the scale - 40% or less, the accuracy is + or - 4%.

Scritto da: G. Tool

Satisfied with this hygrometer

This is the third room hygrometer I have purchased. The first two were always in disagreement. Reading reviews of these units convinced me that anything low cost was unreliable. This unit responds quickly and gives readings that are consistent and that appear to be withing a couple of percent of the relative humidity. I highly recommend it.

Scritto da: Asking for a friend...

Made in China, but seems to be of reasonable quality and calibration

Works well in my basement to monitor the atmosphere for my instruments. I checked the calibration with another instrument at work and it was within spec. Close enough for cigars and guitars!

Scritto da: Dean Walker

Great Value

Accurate and easy to read. Great price and comes with NIST cert. Will buy again no problem. Nice product, great price.

Scritto da: Clear-N-Smooth

Five Stars

I like the options to read the max and min temp and humidity.