Bezbolesna wydajność 70901 PowerBraid Split pleciony rękaw, średnica 1/4, długość 20', czarny

Name: Bezbolesna wydajność 70901 PowerBraid Split pleciony rękaw, średnica 1/4, długość 20', czarny
Brand: Painless
SKU: 0749823709010
Price: 303.57 PLN
Availability: InStock

Brand:Painless

3.8/5

zł
303.57

Terminale Ancor Marine Grade różnią się od terminali samochodowych tym, że zostały zaprojektowane do pracy w trudnych warunkach morskich. Izolatory nylonowe są łatwe do zaciśnięcia i nie pękają. Beczki są zaprojektowane tak, aby ciasno uchwycić drut przy jak najmniejszym wysiłku. Miedź cynowana zapewnia najmniejszy opór elektryczny, ale najlepszą ochronę przed korozją.

Kwota

Dodaj do koszyka Kup Teraz

EAN: 0749823709010

Kategorie Elektronika, Akcesoria i materiały eksploatacyjne, Zarządzanie przewodami, Tuleje kablowe,

Typ dopasowania: Uniwersalny krój. Ciągła temperatura znamionowa -94° do 257°F; Temperatura topnienia 482°F. Minimalne 25% zachodzenia na siebie sprawia, że oplot Power Braid jest bezpieczny nad przewodami, wężami i innymi elementami. Dzielona wiązka ułatwia zastosowanie do już zainstalowanego okablowania. Elastyczny, półsztywny materiał o twardej tkanej fakturze i wyglądzie poprawia wygląd i chroni izolację wszelkich wiązek przewodów elektrycznych lub kabli. Pozwala poprowadzić i zabezpieczyć okablowanie z dala od ruchomych części, wysokiej temperatury i ścierania, a wszystko to podczas czyszczenia instalacji.

Brand	Painless
Brand	‎Painless
Color	Black
Customer Reviews	4.7 4.7 out of 5 stars 101 ratings 4.7 out of 5 stars
Installation Type	Self-Adhesive
Is Discontinued By Manufacturer	‎No
Item Dimensions LxWxH	11 x 8 x 2 inches
Item model number	‎70901
Item Weight	‎3.2 ounces
Manufacturer	‎Painless Performance
Manufacturer Part Number	‎70901
Material	Nylon
Model	‎70901
OEM Part Number	‎70901
Product Dimensions	‎11 x 8 x 2 inches

5 Star

4 Star

3 Star

2 Star

1 Star

Napisz recenzję

Twój e-mail nie zostanie opublikowany. Wszystkie pola obowiązkowe są oznaczone symbolem^*

Twoja ocena

Scritto da: David

Eactly as Described

Exactly as described. Quick Shipment.

Scritto da: Dr. Dave

For professional looking wiring in a vehicle

I just rewired my old truck. In the past, when I've done this, I've used the plastic sleeving that you can get at most parts stores. The plastic always looked cheap to me. I bought a Painless wiring harness and received a short sample of this in the package. I liked it and sought it out once it was time to cover the wiring. It really makes the project look professional, and it's a lot tougher than the plastic. INSTALLING IT As I mentioned above, the brade is tough. It'll dull a pair of scissors immediately. I always got a clean cut with electrical diagonals. As for putting it on the wire? That can be a little daunting. It's hard to open fully (did I mention tough). I found two systems that worked well. When the wire is tight against a surface, I put a section of the sleeving wide open between the wires and the surface, and slide my thumbs down, opening the sleeve as I go. I push the wire in place with index fingers. Alternatively, if the wires are dangling, I put the sleeve around the wires at one end, and as I work I keep thumbs and fingers in the same relative place and slide the sleeve up the wire. That works pretty well, as well. It's rough and can be tough on the fingers, but the finished product makes it worth all the effort and even a bit of pain. As soon as I am finished writing this, I will be ordering more.

Scritto da: David R. Sauter

Easy to use

Really good product I have loomed everything in mr car with this stuff buy the installation tool and it’s really a breeze to get your wires tidied up!

Scritto da: Collin Arner

Amazing sleeving!

This stuff is amazing! While it's considerably more expensive than cheaper plastic cable sleeving, it's worth the price. I used this to clean up the wiring for all of the lights and other accessories in the engine bay of my Jeep. It went from looking like a complete mess, to looking like it was shipped that way from the factory. The sleeving is rugged, and hasn't show any signs of deterioration after several months of use. This is definitely my go-to when I'm trying to achieve that factory clean look.

Scritto da: robert hanson

1/4”braid

The 1/4” is hard to work with as opposed to the 1/2.

Scritto da: IwinYouwin

Works well around a hot engine and looks good too?

I needed to run some new wires around the engine on my antique car and wanted to avoid any of the wires directly touching hot areas and I also did not like the multi colors of the wires. Putting the wires into the black braided sleeve provides some protection from heat while really looking nice and blending in with the engine compartment color wise. The braided sleeves were easy to cut with wire cutters.

Scritto da: T1PSTN

A great way to bundle keyboard and mouse cables

The quarter inch size is perfect for 2-4 eighth-inch cables such as keyboard or mouse cables. Installation is tedious (a few inches at a time) but once installed all of the cables stay inside nicely. The whole thing stays really flexible and does not snag on any surfaces it may drag across (even cloth.) I have also used larger versions of this product to bundle quarter-inch audio cables to create custom snakes. Both sizes perform perfectly.

Scritto da: Amazon Customer

Quality wire loom

This is top quality material and have used it all over my engine compartment. Makes for a professional and clean engine bay.

Scritto da: EricOnline

Must have for restoration

Must have for older car restoration. Split sleeve installs easy. Holds up to 4 wires 18 gauge about 5/16”. Really makes your underhood look neat and it’s protecting your wiring. Looks correct for 50s and 60s period cars.

Scritto da: Faouzi Chargui

Easy to install

It's a great product

Scritto da: Kyle

Five Stars

Looks 10x better and is 10x easier to use than the old ugly plastic loom