Zestaw 3 ostrzy MaxPower 561139B Heavy Duty do cięcia 60 Exmark, zastępuje nr OEM. 103-6403, 103-6403-S, czerwony

Name: Zestaw 3 ostrzy MaxPower 561139B Heavy Duty do cięcia 60 Exmark, zastępuje nr OEM. 103-6403, 103-6403-S, czerwony
Brand: MAXPOWER
SKU: 0844547011705
Price: 599.22 PLN
Availability: InStock

Brand:MAXPOWER

3.7/5

zł
599.22

Model 561139B firmy MaxPower zawiera 3 ostrza do wielu kosiarek firmy Exmark o szerokości cięcia 60 cali. Te ostrza zastępują numery OEM 103-6403 i 103-6403-S. Pasuje do modeli Exmark CT, Front Runner, Laser HP, Laser Z, Laser Z E, Laser Z S, Laser Z X, Laser Z XP, Laser Z XS, Phaser, Pioneer, Quest, SP, Turf Ranger, Ultra Cut i Vantage. Każde ostrze ma wymiary 20-1/2 cala L i 2-1/2 cala W z centralnym otworem 15/16 cala. Sprawdź w instrukcji obsługi, czy numer OEM wymienianego ostrza odpowiada jednemu z numerów OEM tego elementu. Ostrza Maxpower są produkowane tak, aby spełniały lub przewyższały specyfikacje OEM. Dumnie wykonane w USA.

Kwota

Dodaj do koszyka Kup Teraz

EAN: 0844547011705

Kategorie Patio, trawnik i ogród, Elektronarzędzia zewnętrzne, Części zamienne i akcesoria, Części i akcesoria do kosiarek, Części zamienne do kosiarek,

Średnica środkowego otworu 15/16 cala. Mierzy 20-1/2 cala i 2-1/2 cala. Zastępuje numery OEM 103-6403 i 103-6403-S. Pasuje do modeli Exmark CT, Front Runner, Laser HP, Laser Z, Laser Z E, Laser Z S, Laser Z X, Laser Z XP, Laser Z XS, Phaser, Pioneer, Quest, SP, Turf Ranger, Ultra Cut i Vantage. Zawiera 3 ostrza do wielu 60-calowych kosiarek Exmark.

Country of Origin	USA
Customer Reviews	4.7 4.7 out of 5 stars 310 ratings 4.7 out of 5 stars
Item model number	561139B
Item Weight	10.38 pounds
Manufacturer	MaxPower
Product Dimensions	21.38 x 2.7 x 1.6 inches

5 Star

4 Star

3 Star

2 Star

1 Star

Napisz recenzję

Twój e-mail nie zostanie opublikowany. Wszystkie pola obowiązkowe są oznaczone symbolem^*

Twoja ocena

Scritto da: Ray

HD blades

I have only used once so far, but these are noticeably heavier than the blades that came on my exmark lazer z 60 in deck. They seemed to cut fine, but there is more vibration with these. So far so good but only time will tell.

Scritto da: Stephen P. Huval

Re-branded Blade, Thicker than original eXmark

Update: I've been using these blades for a while. They cause a little bit more vibration than exmark blades but it's not bad. I think the extra vibration is probably from the weight of the thicker blades. They cut good and seem to be holding an edge well. I haven't needed to resharpen. I'd recommend them. Original post: I rated 4 stars because this is a re-branded item. A sticker was covering up the original label. I attached a photo of both label's with the box. This is the info printed on the original label, "Copperhead Mower Blades®, Rotary®, part# 15-11248, Replaces 103-6403, 100% Made in the USA". Purchased from: "sold by Amazon.com Services LLC" Sept. 2020 This is the first time I replaced blades on my mower so I purchased an original set of eXmark blades to compare the two products. (Photos with measurements attached) • The hole size, width, and length are identical to the original eXmark brand blades. • The metal is thicker than eXmark. MaxPower almost 1/4", eXmark about 3/16" • The lift is not as wide as eXmark. MaxPower = 1-7/8", eXmark = 2-1/4" • The cut edge is one inch shorter than eXmark. MaxPower = 7-1/2" eXmark 8-1/2" • These weigh more than eXmark. MaxPower = 3.05 lbs., eXmark = 2.65 lbs. I have not tested these blades but they seem pretty good for half the cost of the original eXmark brand. The lawnmower shop told me that older model eXmarks use a different blade. This is the newer size. I have a 2019 Lazer Z e series, 60" deck. Blade# 103-6403

Scritto da: Lil Bit

Fits Exmark 60" Zero turn Perfectly !!

My husband says best Blades ever !! The Cutting edge is great , Cuts better than any blades he has ever used , and he is very particular about his mowing , as we have alot to mow , he said took a half hour off his time . He is very impressed!! Probably order another set just to have on hand .

Scritto da: Mclo

Es durable

Es excelente

Scritto da: Rick L.

Great cutting blades.

These blades are heavy duty just like the oem exmark blades. Cut quality is excellent. I will buy these again.

Scritto da: Gary Wright

Nice heavy duty blades

Heavy duty blades

Scritto da: Marcus Jacobus

The harder steel makes the difference!

When compared with the durability of the standard exmark blades from exmark, these holds their edge alot longer and indeed it is true that you do not have to run your machine at as high of an idle. I have saved time and money with these blades.

Scritto da: Dale

What a difference! These blades worked awesome! The cut quy was a huge improvement!