WARSZTAT Wet/Dry Vacs Adapter do odkurzacza WS25011A 2-1/2-Cal do 1-1/4-Cal Universal Shop Adapter węża do odkurzacza do sklepu Akcesoria do odkurzaczy

Brand:WORKSHOP Wet/Dry Vacs

3.3/5

134.07

OPIS PRODUKTU Jeśli masz akcesoria do odkurzania na mokro i na sucho o średnicy 1,5 cala i wąż o średnicy 2,5 cala, ten adapter do odkurzania na sucho i na mokro jest właśnie tym, czego potrzebujesz. Uzyskaj zwrotność mniejszych przystawek próżniowych, gdy jej potrzebujesz, i nadal możesz korzystać z węża 2-1/2 cala do dużych zadań. OD PRODUCENTA Dopasowuje wąż odkurzający 2-1/2 na mokro/na sucho do akcesoriów 1-1/4. Średnica 2-1/2 pozwala na zbieranie większych zanieczyszczeń, a akcesoria 1-1/4 zapewniają większą wszechstronność.

Ssij to. Zrób to. z odkurzaczem do pracy na mokro i sucho WORKSHOP WS25011A adapter do odkurzacza na mokro i na sucho pomaga lepiej wykorzystać odkurzacz w sklepie. Najlepszy adapter do odkurzania na sucho i mokro do danego zastosowania będzie się różnić. Zobacz także WS25007A i WS25055A. Uniwersalny adapter do odkurzaczy sklepowych umożliwia użytkownikom dalsze korzystanie z węży o średnicy 2,5 cala w celu zbierania większych zanieczyszczeń i maksymalnego przepływu powietrza, ale stosowanie węży o średnicy 1,5 cala podczas podłączania mniejszych narzędzi, przystawek i akcesoriów. Zapewnia dodatkową wszechstronność dzięki szerszemu zakresowi dostępnych narzędzi i opcji. Adapter do odkurzania na mokro i na sucho łączy 1-1/4-calowe akcesoria do odkurzania na mokro i na sucho z 2-1/2-calowym wężem do odkurzania na mokro/na sucho. Ssij to. Zrób to. z odkurzaczem do pracy na mokro i sucho WORKSHOP WS25011A adapter do odkurzacza na mokro i na sucho pomaga lepiej wykorzystać odkurzacz w sklepie. Najlepszy adapter do odkurzania na sucho i mokro do danego zastosowania będzie się różnić. Zobacz także WS25007A i WS25055A. Uniwersalny adapter do odkurzaczy sklepowych umożliwia użytkownikom dalsze korzystanie z węży o średnicy 2,5 cala w celu zbierania większych zanieczyszczeń i maksymalnego przepływu powietrza, ale stosowanie węży o średnicy 1,5 cala podczas podłączania mniejszych narzędzi, przystawek i akcesoriów. Zapewnia dodatkową wszechstronność dzięki szerszemu zakresowi dostępnych narzędzi i opcji. Adapter do odkurzania na mokro i na sucho łączy 1-1/4-calowe akcesoria do odkurzania na mokro i na sucho z 2-1/2-calowym wężem do odkurzania na mokro/na sucho.
Batteries Included? ‎No
Batteries Required? ‎No
Brand WORKSHOP Wet/Dry Vacs
Color Black
Color ‎Black
Country of Origin ‎Mexico
Customer Reviews 4.3 4.3 out of 5 stars 1,701 ratings 4.3 out of 5 stars
Domestic Shipping Item can be shipped within U.S.
Included Components ‎2-1/2 in. to 1-1/4 in. Adapter
International Shipping This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer ‎No
Item Dimensions LxWxH 2.44 x 2.44 x 3.25 inches
Item model number ‎WS25011A
Item Package Quantity ‎1
Item Weight ‎0.634 ounces
Manufacturer ‎Emerson Tool Company
Part Number ‎WS25011A
Power Source ‎hand_powered
Product Dimensions ‎2.44 x 2.44 x 3.25 inches
Special Features ‎Wet/Dry
Warranty Description ‎No Warranty

3.3

13 Review
5 Star
67
4 Star
14
3 Star
8
2 Star
3
1 Star
7

Napisz recenzję

Twój e-mail nie zostanie opublikowany. Wszystkie pola obowiązkowe są oznaczone symbolem*

Scritto da: jt
Works as Expected. Sizing Claims Too Vague
I don't know about you all but this shop vacuum hose size thing is ridiculous. Rigid, ShopVac, Craftsman, and whoever else are petty. Either make them the standard sizes, same as standard PVC, or at least be upfront about the connection sizes ID and OD. I got this adapter to attach my Rigid vacuum/Dustopper to my DeWalt mitre saw. The hose from the vacuum to the adapter is from Rigid (model LA2550 2-1/2 in. x 7 ft. Dual-Flex Tug-A-Long Locking Vacuum Hose for RIDGID Wet/Dry Shop Vacuums). The adapter fits quite snug on the end of the hose. The smaller end does not fit onto the DeWalt saw. I had to heat gun a piece of PVC and stretch it around the end of the adapter. The other end of the PVC was also stretched wider the same amount so that it would fit snug inside of the saw. Other than the questionable sizing claims of the adapter, it works as hoped. The plastic maybe a little on the thin side and feels a bit flimsy but I don't expect to toss it around so it should be fine.
Scritto da: Tami
Doesn't fit Craftman 2.5" hose without adjustment
I bought this because I got a new Craftmans shop vac from Lowes. The end is 2.5" and all the attachments from my previous shop vac are 1.25". I tried to put it on the end of my 2.5" hose and it would fall back off because it was just slightly too big. I didn't want to have to deal with returning it so I added a small piece of electrical tape in one spot along the inside of the attachment. That took up just enough slack that it would stay on the end of the hose. 2 stars because after that adjustment it had good suction and the 1.25 end worked fine with all my attachments. Doable but poor quality control making it not as advertised.
Scritto da: MV
Works as expected
Good purchase- worked as expected.
Scritto da: Mike
Works with my Craftsman Wet Vac with 2 1/2 in hose.
I wanted something to clear out my A/C PVC pipes and had just purchased a Craftsman Wet/Vac and didn't realize it came with 2.5 inch hose so it was way too big to fit over the 1 in (outer dimension) PVC pipe like my old 1 1/4 inch hose did. This attachment fit right over the end of the 2.5 inch hose and fit over the PVC pipe perfectly and allows me to also use other tools meant for a 1 1/4 hose. I didn't give it a full 5 stars only because it's a little thin and doesn't seem that rugged, but for the price a good deal.
Scritto da: Bernard Metro
Solved the problem
The 2.5" hose of my 16 Gal. shop vac is unwieldy when working in small spaces. Bought this adapter so that I could add a 1.25" hose. This solved the problem, both in the workshop and when cleaning the cars. Worth the money. Strange that this is NOT a standard accessory with the larger shop vacs.
Scritto da: Mike
Fits perfectly.
Fits tools well. After reading the negative reviews about it not fitting, it appeared the users were not using it correctly. Now Thai have received the adapter, my suspicions were confirmed. The large end fits perfectly on the shop vac hose (2 1/2”) and the small end fits perfectly on my tools with 1 1/4” outlets. Looking at the pictures from the negative reviews, some were trying to fit this adapter to the outlet on the vacuum, where the hose attaches. It doesn’t go there, it goes on the end if the hose where the attachments go.
Scritto da: John
Works as described
I used to use a little 2.5 gallon craftsman shop vac that a 1 1/4" hose. I recently upgraded to a large Ridgid shop vac with 2 1/2" hose and I'm able to use all the old attachments on the new shop vac. I'm also able to hook up my Kreg K4 pocket hole jig using this attachment as well. It fits snugly onto attachments and is very useful. Glad I bought it.
Scritto da: Rusty Mccullough
It works as it is designed to
It is sturdy, sized according to specifications advertized
Scritto da: Robert Sawaryn
Is not as advertised
Absolutely terrible product. Not only does it not funnel, causing clogs. Neither are sized as advertised. Both are significantly smaller. Mine measured less than 1 inch by 2.2inches. bought product from company Woodstock for half the price and is far superior.
Scritto da: Gary Giste
Perfect for my shop vac!
This 2-1/2 to 1-14 adapter allows me to use more attachments with my shop vac.
Scritto da: Derek Thompson
Happy
Perfect fit very happy
Scritto da: Frank valencia
Buen producto
Buen producto tal y como son las medidas que ocupaba
Scritto da: PWS
Four Stars
Great adapter, better price than local stores.

Produkty powiązane

Odkryj naszą międzynarodową sieć

Wysyłamy do 28 krajów, ponad 200 000 produktów. Bądź na bieżąco, zapisz się do newslettera.

Array