Uxcell regulowany uchwyt klucza do kranu, 1/4-3/4 (UNC/UNF) / 6mm-20mm pojemność, rozwiertak do kranu klucz do gwintowania, długość 315mm

Brand:Uxcell

2.9/5

216.43

Wskazówki: Siła obu rąk musi być równomierna podczas obsługi pokrętła. Klucz i gwintownik powinny tworzyć kąt 90 stopni, a gwintownik i gwintowany dolny otwór są do siebie prostopadłe. Łatwy w użyciu: działa obiema rękami, obracając klucz do kranu w określonym kierunku, aby przetworzyć, naprawić i wyczyścić gwint wewnętrzny. Cechy: Klucz do gwintowników ma 1 sztywny uchwyt i 1 regulowany uchwyt, który łatwo i pewnie dostosowuje szczęki do zaciskania narzędzi. Prosty klucz do gwintowników zapewnia doskonałą dźwignię i jest szczególnie odpowiedni do gwintowników o większej średnicy. Zastosowania: Ręczny klucz do gwintowników może zaciskać różne krany do operacji gwintowania. Może być również używany z wiertłami, rozwiertakami, wykrętakami do śrub i innymi małymi narzędziami, które muszą być obracane ręcznie. Klucz do kranu: Dopasuj pojemność 1/4-3/4 (UNC/UNF) / 6mm-20mm, oferując twardość i odporność na zużycie. Dzięki wyraźnym krawędziom i narożnikom klucz może mocno i niezawodnie zaciskać gwintowniki.

Wskazówki: Siła obu rąk musi być równomierna podczas obsługi pokrętła. Klucz i gwintownik powinny tworzyć kąt 90 stopni, a gwintownik i gwintowany dolny otwór są do siebie prostopadłe. Łatwy w użyciu: działa obiema rękami, obracając klucz do kranu w określonym kierunku, aby przetworzyć, naprawić i wyczyścić gwint wewnętrzny. Cechy: Klucz do gwintowników ma 1 sztywny uchwyt i 1 regulowany uchwyt, który łatwo i pewnie dostosowuje szczęki do zaciskania narzędzi. Prosty klucz do gwintowników zapewnia doskonałą dźwignię i jest szczególnie odpowiedni do gwintowników o większej średnicy. Zastosowania: Ręczny klucz do gwintowników może zaciskać różne krany do operacji gwintowania. Może być również używany z wiertłami, rozwiertakami, wykrętakami do śrub i innymi małymi narzędziami, które muszą być obracane ręcznie. Klucz do kranu: Dopasuj pojemność 1/4-3/4 (UNC/UNF) / 6mm-20mm, oferując twardość i odporność na zużycie. Dzięki wyraźnym krawędziom i narożnikom klucz może mocno i niezawodnie zaciskać gwintowniki.
Batteries Included? ‎No
Batteries Required? ‎No
Brand Uxcell
Brand ‎Uxcell
Color Black, Silver Tone
Color ‎Black, Silver Tone
Customer Reviews 3.9 3.9 out of 5 stars 128 ratings 3.9 out of 5 stars
Finish ‎Powder Coated
Finish Type ‎Powder Coated
Head Style ‎Fixed Square
Included Components ‎1 x Adjustable Reamer Wrench
Item Dimensions LxWxH 12.2 x 1.57 x 0.79 inches
Item Dimensions LxWxH ‎12.2 x 1.57 x 0.79 inches
Item model number ‎a12051600ux0662
Item Package Quantity ‎1
Item Weight 0.01 Ounces
Item Weight ‎0.01 Ounces
Manufacturer ‎uxcell
Material Die-casting Body Steel Handle
Material ‎Die-casting Body Steel Handle
Measurement System ‎Inch
Operation Mode ‎Mechanical
Part Number ‎A12051600ux0662
Product Dimensions ‎12.2 x 1.57 x 0.79 inches
Size ‎6mm-20mm

2.9

8 Review
5 Star
52
4 Star
13
3 Star
18
2 Star
8
1 Star
10

Napisz recenzję

Twój e-mail nie zostanie opublikowany. Wszystkie pola obowiązkowe są oznaczone symbolem*

Scritto da: John Reid
As described
It is a not top quality tool that does the job but remember when buying the jaws open enough to fit a 12mm tap not a half inch opening. If you need a tap handle for occasional jobs and your tap is smaller than 12 mm it will do the job. You get what you pay for and that is not always a bad thing.
Scritto da: John B
It works like it should
It's just a tool, does not need to be chrome plated I guess! It works like it should, just took too long to get here from overseas. I wish the seller would have given details of it's origin, that it was sourced from over seas, then would probably have chosen another supplier. Otherwise, no complaints. Thank you.
Scritto da: Arthur B.
You get what you pay for.
It's okay for the price, but loosens its grip too easily.
Scritto da: Squeaky Mouse
Mine wouldn't fit a 3/8 tap head, good tool other wise. Use for smaller stuff.
This is a decent tap wrench for the price. On the tool it says it will go up to 1/2 inch taps. This is not right( on mine at least), It wouldn't fit a 3/8 tap head.... So yes it is worth buying, just use it for smaller stuff and it is perfect.
Scritto da: Mr. R. Holland
Permanent handle for shut-off valve
The convenient size of this wrench (and good price) convinced me to leave this on the four-sided steel rod attached to my house's water shut-off valve, 16" deep in the ground outside (steel rod is hidden within a hedge). A spray of camouflage paint minimizes visibility of the wrench. Now, there's no need to go searching for the valve handle in an emergency. ; - )
Scritto da: Xial
Nonslip is a misnomer.
I loaded a tap into this unit, and found that the tap just could not be tightened in and held in place very well. Not much is more annoying than being half-way done tapping something, and having the wrench fall off the tap. I surmise the issue is with the tap in use: it's a half inch tap, and this just barely fits in the wrench with a little give.
Scritto da: Shawn D.
Get a handle on this!
This handle will handle your tap while you’re tapping.
Scritto da: John B.
Didn't fit my tap
I know a lot about tools but don't have a great deal of experience using taps and dies. I thought that all taps had a standard size end which fit into the tap handle. Well, I assumed wrong as my 16mm tap wouldn't fit. Wound up up tapping my nut using vise grips in stead of this handle. I can't attest to its durability other than it feels flimsy and not made to last. I was buying it to tap one nut so it was a bit of a throw away anyhow. If you're looking for a durable tool to add to your collection I would look elsewhere but for the once in a blue moon use it guess it would get you through the task. Good luck.

Produkty powiązane

hot
Plastikowy klucz do filtra wody GE
3.5/5

zł 133.66

Plastikowy klucz do filtra wody GE
3.5/5

zł 133.66

Odkryj naszą międzynarodową sieć

Wysyłamy do 28 krajów, ponad 200 000 produktów. Bądź na bieżąco, zapisz się do newslettera.

Array