Uchwyty RCBS Bullet Mold

Brand:‎RCBS

3.5/5

436.97

RCBS specjalizuje się w oferowaniu kompletnej linii materiałów przeładunkowych do domowych ładowarek ręcznych. Materiały do ​​przeładowywania RCBS wyznaczają standardy wysokiej jakości sprzętu do przeładowywania - tak jak robią to od ponad 60 lat. Mając za sobą sześć dekad doświadczenia, RCBS zna wszystkie tajniki sprzętu używanego przez domowe przeładowywacze amunicji. Mosiężna łuska jest najdroższą częścią załadowanej amunicji. Ponowne ładowanie mosiądzu (poprzez wymianę spłonki, prochu i pocisku wewnątrz zużytej mosiężnej łuski) zapewnia oszczędność około 60% w porównaniu z fabrycznie ładowaną amunicją. Materiały do ​​ręcznego ładowania RCBS zapewniają strzelcom wszystko, co potrzebne do ponownego użycia drogich mosiężnych łusek poprzez ponowne załadowanie ich nowym podkładem, prochem i pociskami.

Jeden rozmiar pasuje tylko do wszystkich form pocisków RCBS. Idealny do domowego odlewania pocisków. Solidne stalowe ramy z wyjątkowo długimi uchwytami z twardego drewna. Uchwyty z drewna / stali. Uchwyty z drewna / stali. Uchwyty z drewna / stali. Uchwyty z drewna / stali. Uchwyty z drewna / stali.
Brand Name ‎RCBS
Color ‎Multi
Customer Reviews 4.5 4.5 out of 5 stars 54 ratings 4.5 out of 5 stars
Included Components ‎Wood/Steel Mould Handles
Item Dimensions LxWxH ‎1 x 1 x 1 inches
Item Package Dimensions L x W x H ‎10.7 x 2.2 x 1.2 inches
Item Weight ‎0.06 Pounds
Manufacturer ‎RCBS
Material ‎Blend
Model Name ‎80025
Model Year ‎2012
Number of Items ‎1
Package Weight ‎0.9 Pounds
Part Number ‎80025-RCB
Size ‎One Size
Sport Type ‎Hunting
Suggested Users ‎Unisex-adult

3.5

8 Review
5 Star
74
4 Star
10
3 Star
9
2 Star
3
1 Star
4

Napisz recenzję

Twój e-mail nie zostanie opublikowany. Wszystkie pola obowiązkowe są oznaczone symbolem*

Scritto da: P. D. Smith
Good quality but be mindful they won't fit everything as is.
I've always liked these handles, and really like Accurate Molds (just got my third, for my 45-70). The RCBS handle never had an issue out of the box before on these molds but as mentioned on Accurate's site, the newer molds appear to have had their holes drilled a bit smaller and it's possible they are in a slightly different position. As is, these no longer work with the mold, requiring a small boring of the handle holes, and possibly some minor filing to the handle itself. Some might not mind. For such a costly handle, not sure why they made the change and I'm going with the Lee 6 cav., though I prefer the RCBS in all other ways.
Scritto da: Hank D
Right mould, right handle.
RCBS bullet moulds are high quality, and it follows that their handles will be too. I have 4 sets with my favorite RCBS moulds mounted and ready to cast. The handles are solid, manufactured of thick plate stock. The hinge bolts have never worked loose, and the alignment has always been good. The only problem I ever experienced was a cracked wooden handle that caused a fertile to loosen. I contacted RCBS, and true to their word, they replaced the handles free. I've read elsewhere of casters using Lee handles with RCBS moulds to save a few bucks, but after a friend gave me a set of Lee handles, I examined them, and tossed them in the recycling bin. Recommended.
Scritto da: Joe
Only RCBS handles that work perfectly
These are the best. It doesn't matter what they tell you Lyman and Lee mold handles off a 2 or 6 cavity mold will NOT work with RCBS. Save the headache, buy these.
Scritto da: gunner
Would not buy these again
Compared to Lyman handles these are cheaply made. The clamp part is a laser cut and stamped part held together with a bolt. The Lyman are forged and riveted. The wood handles are way to long and look like they were cut from a broom handle. When you fasten a die to the handles they are very front heavy and hard to hold. If you look at the picture on site you can see how long they are. I bought these because I bought a used 44 mag mold that is RCBS and had no choice. I normally buy Lyman molds. Not happy but I will modify them to work better. RCBS normally makes a good product but I feel they cheeped out on these. And they are a lot more costly than other makes.
Scritto da: Vark Driver 1
Good product
A little pricey I thought but no other options for casting bullets with their moulds.
Scritto da: VEARL
Four Stars
JUST WHAT I NEEDED
Scritto da: Pen Name
bullet mould
I have not yet to use. I think is good when i have time to make bullet. This bullet mould look good quality.thank .
Scritto da: Goose Slayer
Important accessory
Works perfectly with the RCBS moulds. Well made handles.

Produkty powiązane

Odkryj naszą międzynarodową sieć

Wysyłamy do 28 krajów, ponad 200 000 produktów. Bądź na bieżąco, zapisz się do newslettera.

Array