SharkBite U860B25 Rura PEX 1/2 cala, niebieska, elastyczna rura wodna, woda pitna, złączki hydrauliczne Push-to-Connect, 25 stóp zwoju Rury niebieskie 1/2 cala 25 stóp cewka

Brand:SharkBite

3.7/5

248.82

SharkBite PEX Tubing to doskonały elastyczny produkt do rur wodnych do systemów hydraulicznych i hydraulicznych o doskonałym przepływie. Rury PEX są elastyczne, łatwe w montażu i minimalizują hałas spowodowany uderzeniem hydraulicznym. Przeznaczone do stosowania w przewodach ciepłej i zimnej wody pitnej, niebieskie rurki PEX są powszechnie stosowane w przewodach zimnej wody w celach identyfikacyjnych. CIĘCIE. NACISKAĆ. ZROBIONE. System połączeń SharkBite sprawia, że ​​każdy projekt hydrauliczny jest szybki i łatwy dzięki unikalnej technologii szybkiego łączenia pushfit. Kiedy wkładasz rurę do szybkozłącza SharkBite, zęby złączki ze stali nierdzewnej wgryzają się i chwytają rurę, podczas gdy specjalny O-ring ściska się, tworząc wodoszczelne uszczelnienie.

WYKONANE W USA: Wszystkie złącza, adaptery i orurowanie SharkBite są produkowane i testowane w USA. PREFEROWANE PRZEZ PROFESJONALISTÓW: Wszystkie rurki SharkBite PEX spełniają te same standardy dla komercyjnych i mieszkaniowych zastosowań hydraulicznych; Wąż PEX doskonale nadaje się do napraw i jest łatwy do cięcia za pomocą nożyc SharkBite. PUSH-TO-CONNECT: Używaj ze złączkami hydraulicznymi SharkBite typu push-to-connect lub mosiężnymi złączkami kolczastymi za pomocą narzędzia do zaciskania PEX lub połączeń zaciskowych. ELASTYCZNA RURA PEX: Przewód rozszerza się i kurczy wraz ze zmianami temperatury i jest odporny na zamarzanie. PEX TUBING: Elastyczne rury wodociągowe do systemów dystrybucji wody pitnej; odporny na chlor i promieniowanie UV; minimalna temperatura robocza 33 stopnie Fahrenheita przy 160 PSI i maksymalna temperatura robocza 200 stopni Fahrenheita przy 80 PSI.
Batteries Included? ‎No
Batteries Required? ‎No
Brand SharkBite
Brand ‎SharkBite
Color Blue
Color ‎Blue
Customer Reviews 4.7 4.7 out of 5 stars 5,678 ratings 4.7 out of 5 stars
Included Components ‎PEX Pipe Coil
Is Discontinued By Manufacturer ‎No
Item Dimensions LxWxH 23.5 x 23.5 x 2 inches
Item Dimensions LxWxH ‎23.5 x 23.5 x 2 inches
Item model number ‎PEX Tubing
Item Package Quantity ‎1
Item Weight 1.39 Pounds
Item Weight ‎1.39 Pounds
Manufacturer ‎Cash Acme
Material PEX
Material ‎PEX
Maximum Pressure 160 Pound per Square Inch
Maximum Pressure ‎160 Pound per Square Inch
Measurement System ‎Inch
Nominal Wall Thickness 0.5 inch
Nominal Wall Thickness ‎0.5 inch
Part Number ‎U860B25
Pattern ‎Pipe
Product Dimensions ‎23.5 x 23.5 x 2 inches
Size ‎1/2 Inch
Style ‎25 Foot Coil
Warranty Description ‎Warranty

3.7

13 Review
5 Star
84
4 Star
10
3 Star
3
2 Star
1
1 Star
2

Napisz recenzję

Twój e-mail nie zostanie opublikowany. Wszystkie pola obowiązkowe są oznaczone symbolem*

Scritto da: Amazon Customer
Frozen Copper Elbow
I never repaired copper pipes before. I discovered a small crack located in a copper elbow fitting in the crawl space. Pipe was frozen. I turned off water at the well, pushed the black button on the Big Blue filter to let out air and water and opened up all the faucets to drain them. I read everything I could quickly. The shark bite 1/2 inch pex tubing came very fast, thank God! I didn't have water... Amazon saved me again. So, I ordered a cool Loreso mini copper pipe tubing cutter for about 10.00 another absolute must have and it cut this blue sharkbite pex perfectly half inch. It also cuts copper great. I ordered 2 of the 1/2 inch Eifield elbow copper connectors (8.00 approx) and ruined both by getting too pipe cutting happy by trying to recycle another pipe from an old water heater for the repair. Short story and lesson learned, this shark bite 1/2 inch pex tubing curved in a sort of square U nicely I joined the ends to the existing 2 copper pipes with another set of Eifield 1/2 inch elbows that I had to order but this time I ordered 6 at about 25.00 to have on hand. I would have ordered the shark bite elbows but they were not going to be delivered next day. I was pleasantly surprised all around. There is teethe inside the shark bite and Eifield copper elbow connectors that grip on pex or copper tubing so when you use the copper connectors to connect this blue pex push hard in then pull out to make sure the teeth gripped on to this blue pex and or copper tubing. There is no need to ever solder copper again or worry about firing up a torch in close proximity to flammables. Blue pex tubing does not freeze apparently. Buying this may save you later. I used about 8 inches of this total and hope to change out more copper to this blue 1/2 in sharkbite pex in time.
Scritto da: Tirra
Very poor item description.
The outside and inside diameter measurements for this tubing needs to be made MUCH clearer in the product listing. I first bought the 1/2" tubing because one of the photos for it indicated that it was the OD that was 1/2". Not true. The OD was about 11/16. It was the ID that was 1/2". Had to go to the trouble of returning that order and ordering the 3/8" tubing, which is 1/2" OD and 3/8 ID. So, just some helpful advice to the seller: Do you enjoy having a lot of these tubing orders returned to you? If not, then you really should make the ID and OD measurements for each size tubing MUCH for clear. Yes, I realize now that it is stated in small print, WAY down in the lising description, but there would be almost no confusion at all if you made it an obvious part of the products advertisement header.
Scritto da: Amazon Customer
I use with Sharkbite fittings
It works great with the Sharkbite fittings and is easy to cut. I will use pex fittings someday and I think this work well.
Scritto da: DrB
PEX fitings and valves are a great solution for plumbing in many instances.
PEX fitings and valves are a great solution for plumbing in many instances. There are many sizes and types of PEX fittings, and fixtures available.
Scritto da: Tim L
Worked as should
Price was great, and worked as it should, but if i had to do over again, i would not have ordered rolls, i had a lot of short pieces and being rolled up made it a little difficult to work with, but it is in no way a defect, its just the nature of it being rolled up, just had to straighten each piece before install, over all i was happy with this product,
Scritto da: Carl Deal
Great value!
I ran this Pex from my home to my shop as conduit for my fiber optic cable. Worked fantastic!
Scritto da: Bookman
Better than cpvc or pvc
This stuff is great. Much easier to conform to the area you are working on. I've had to replace 80% of our under-cabin plumbing due to raccoons. I use PUSHFIT connectors and T's to really speed up the process. No waiting for glue to dry. This took me five days a few years ago when we had a raccoon problem. With this I got it done in one day. Forget PVC and CPVC. This is cheaper and way easier to use. Highly recommend. Not paid or working for them, just a consumer.
Scritto da: milo hetzel
cheap and easy fix
easy to install. not super strong and can be easily damaged. meets local codes. has some flexibility to avoid 90 degree joiners in some non-tight situations. works well with push in fittings to avoid $100+hr. plumbing charges. watch some youtube videos if you haven't used it before.
Scritto da: Niatros
works
works
Scritto da: Tony Roussy
Simplement parfait
Utilisation dans un chalet en remplacement du cuivre. Très maléable, facile à plier et à couper Aucune fuite et s’adapte parfaitement aux différents raccords. Je recommande
Scritto da: Amazon Customer
Timely arrival
In floor heating.....timely arrival....
Scritto da: Karl Barrett
Was available
Product was cheaper and available
Scritto da: Nick
Excellent product
Product is exactly are described and has good quality to it. Had to use a heat gun to straighten out the tubes due to the nature of shipping them curled. Took minimal effort and the product holds the new shape once cooled.

Produkty powiązane

Odkryj naszą międzynarodową sieć

Wysyłamy do 28 krajów, ponad 200 000 produktów. Bądź na bieżąco, zapisz się do newslettera.

Array