Przenośna skrzynka narzędziowa - Schowki na narzędzia, części, materiały rzemieślnicze lub sprzęt firmy Stalwart - Skrzynka narzędziowa wspornikowa Czarna/żółta skrzynka narzędziowa wspornikowa Skrzynka narzędziowa

Brand:Stalwart

3.3/5

521.69

Przenośna skrzynka narzędziowa firmy Stalwart to rozwiązanie do przechowywania w jednym miejscu, którego szukałeś. Ta konsolowa skrzynka narzędziowa otwiera się, odsłaniając 5 przegródek na trzech poziomach dla łatwego dostępu, wygodny uchwyt do przenoszenia i środkowe pętle na pokrywach, aby dodać zamek lub karabińczyk. Pierwszy poziom tacek ma przezroczyste górne pokrywy zatrzaskowe, do których można uzyskać dostęp bez otwierania całego pudełka, podczas gdy dolny poziom zawiera dużą sekcję do przechowywania, która jest idealna do przechowywania większych przedmiotów, takich jak narzędzia - ma miejsce na wszystko, czego potrzebujesz do utrzymania porządku. To wielofunkcyjna przenośna skrzynka narzędziowa, która idealnie nadaje się do wszystkiego, od narzędzi i sprzętu, takiego jak gwoździe, śruby i wkręty, po sprzęt wędkarski, koraliki, biżuterię, artykuły hobbystyczne i rękodzielnicze.

SZCZEGÓŁY PRODUKTU - Materiał: tworzywo PE i stal. Wymiary: (dł.) 18 x (szer.) 8,25 x (wys.) 11,8”. Górna taca: (dł.) 14,8 x (szer.) 3,5 x (wys.) 2; Środkowa taca: (dł.) 15,9 x (szer.) 3,5 x (wys.) 1,8; Pojemnik podstawowy: (dł.) 16,2” x (szer.) 7,9” x (wys.) 3,7”. Kolor żółty. WIELOFUNKCYJNY - Ta doskonała uniwersalna walizka do przechowywania jest idealna do wszystkiego, od narzędzi, sprzętu, takiego jak gwoździe, śruby i śruby, po sprzęt wędkarski, koraliki, biżuterię i materiały rzemieślnicze! To rozwiązanie do przechowywania w jednym miejscu, którego szukałeś! PRZENOŚNY - Dzięki wygodnym uchwytom do przenoszenia ta duża skrzynka narzędziowa o długości 18 cali jest łatwa do przenoszenia i przyjazna w podróży. Dodaj zamek lub karabińczyk do pętelek na przezroczystych plastikowych pokrywach, aby uniemożliwić otwarcie skrzynki narzędziowej i zabezpieczyć jej zawartość. WYTRZYMAŁA - Wykonana z wytrzymałego tworzywa sztucznego, ta obudowa jest długotrwałą opcją dla wszystkich Twoich potrzeb związanych z przechowywaniem. Konstrukcja schodkowa skrzynki narzędziowej z 3 szufladami równomiernie rozkłada ciężar, zapewniając stabilność i zapobiegając przewróceniu się przy pełnym otwarciu. 3-POZIOMOWA SKRZYNKA NARZĘDZIOWA - Ta wspornikowa skrzynka narzędziowa otwiera się, ukazując 5 przegródek na 3 poziomach, w tym dużą sekcję do przechowywania, idealną na większe przedmioty. Górny poziom tacek ma przezroczyste pokrywy, które zapewniają łatwy dostęp bez otwierania całego pudełka.
Batteries Required? ‎No
Brand Stalwart
Brand ‎Stalwart
Color Black/Yellow
Color ‎Black/Yellow
Customer Reviews 4.2 4.2 out of 5 stars 200 ratings 4.2 out of 5 stars
Included Components ‎Tool Box
Item model number ‎75-3082A
Item Package Quantity ‎1
Item Weight ‎8.05 pounds
Manufacturer ‎Trademark GLB
Material Plastic
Material ‎Plastic
Number of Compartments ‎5
Part Number ‎75-3082A
Pattern ‎Tool Box
Product Dimensions 18"L x 11.8"W x 8.25"H
Product Dimensions ‎18 x 11.8 x 8.25 inches
Product Dimensions ‎18"L x 11.8"W x 8.25"H
Shape ‎Rectangular
Size ‎18"
Style ‎Cantilever Toolbox
Water Resistance Level Water Repellent
Water Resistance Level ‎Water Repellent

3.3

10 Review
5 Star
63
4 Star
17
3 Star
7
2 Star
4
1 Star
10

Napisz recenzję

Twój e-mail nie zostanie opublikowany. Wszystkie pola obowiązkowe są oznaczone symbolem*

Scritto da: dcfw
Seems well made
My aunt loves to crossstitch, and is good at losing track of her embroidery thread supply. I wanted something to keep it organized and in one place. I tried a stacking plastic organizer box, but felt that she would have trouble aligning and latching the layers with the one I purchased. With this, every layer is attached together, and opens easily with the handles. It is fairly lightweight for a toolbox, but fairly heavy for a sewing box. Only wish it opened a little wider so the layers don't overlap when it's fully open. It might be difficult to access the rows of thread towards the outside in the middle and bottom layers. I do like the clear plastic covers on the top drawers.
Scritto da: WGonz
Nice but note very sturdy
The plastic Clips that hold the small trays broke very easily and quickly. As a result, if I lift to open the tool box to quickly the tray (s) will pop out from the bracket that should be holding them securely if the clips hadn't broken.
Scritto da: Joey
Look everywhere for this, it's exactly what I need... BUT it is cheaply made. dealbreaker? no.
I looked high and low for a cantiliver box like this, this is it. it is as pictured. It's extremely cheaply built, and it does fall over on it's own weight if you don't open both sides at the same time. It wiggles and twists, and i wouldn't recommend for serious contractor usage. That said, we're just using it to store hand tools at home, so it's perfect for that. note - due to the very small clearances when the flaps are opened, you can't actually get that big of items inside it. we had hoped to store bit driver sets and drill bit sets, no go - all of the boxes were too wide, to tall, or if they did fit it wouldn't close with them inside. I wish they made a slightly larger model, and I REALLY wish they made a stronger model. I'd pay. Would I buy again? Absolutely.
Scritto da: Christian V.
More than adequate.
This box is very nice. It’s plastic/metal construction makes it sturdy and functional. All compartments open nicely and accesible. I like the transparent lid top to be able to see at a glance my most frequently use tools in the top compartments. My only caveat is the only way to properly open the top lid is to erect the carry handle bar. If the bar is in the flat position, you won’t be able to open the lid. It’s either that or you have to slide over the entire double compartment side to open the top lid. To me it’s not too much of a nuisance but that’s why I gave it 4 out of 5 stars. All in all I like it and I might consider getting a second. At least for sure if I find one in a diferente color.
Scritto da: Samurai Dave
Very sturdy. High quality.
This is the same toolbox that was made by Stanley under the FatMax brand name. The only thing that has changed is the color is yellow instead of silver. When Stanley stopped offering them, I tried to find a replacement, but nothing came close. Plastic tackle boxes are too light weight for my needs. When I saw this toolbox, it looked very familiar, so I order one to confirm it was an equivalent to the FatMax. I'm happy to report it is! :-D I use one for welding torch supplies, another for airbrush components, and yet another for carrying small tools. Very rugged and reliable. Really like to be able to open it up and see everything at once, instead of pulling out drawers. The clear plastic lids help me know which side to open to quickly find what I need. I will certainly be buying more.
Scritto da: K. Berggren
A little smaller than I thought, but very sturdy
Metal is a little lighter than I though it would be, but I used it as a wax box for my ski team and the open/close mechanism is very smooth, easy to see everything in the toolbox at once without losing anything in the bottom. Very satisfied. wish they made it in a slightly larger version.
Scritto da: Amazon Surfer
Works for organizing light weight tools
I bought this toolbox to organize all my knife sharpening gear. For my use it seems to be perfect. The black colored sides are plastic, the body, trays, and handles are metal. The rivets that hold the trays to the sides are plastic. I would not use this toolbox for heavy tools. It seems great for organizing hobby type items.
Scritto da: Larry C.
Great find for Dremel and Exacto tools!
This box held all my Dremel accessories, Dremel tool and a large Exacto knife kit with accessories. I am very pleased with the purchase and would recommend this as a great way to store these items. The lock feature is okay and does the job. That being said, if anyone's wanted to, they could just snap the plastic lid open. I found it sturdy enough for me.
Scritto da: Josh
Love these.
Sturdy, good price, can't complain. Only suggestion I do have is make sure the hinge fasteners are put in before it leaves the factory!! I had to put nuts and bolts in some because they were missing. Probably stronger anyway. I bought 3 so far
Scritto da: Barbara
Pretty and sturdy but super heavy
I like the internal size though.

Produkty powiązane

hot
Proto 577-5299 Pudełka Zestaw narzędzi
3.7/5

zł 290.03

Proto 577-5299 Pudełka Zestaw narzędzi
3.7/5

zł 290.03

Odkryj naszą międzynarodową sieć

Wysyłamy do 28 krajów, ponad 200 000 produktów. Bądź na bieżąco, zapisz się do newslettera.

Array