0
0

Całkowity:zł 0.00

Zobacz koszykWymeldować się
LoginRegister
0

Całkowity:zł 0.00

Zobacz koszykWymeldować się
LoginRegister

Oświetlenie Armacost 840240 do oświetlenia LED, z wyjmowanym przewodem zasilającym, 24 wat, białe oświetlenie 24 wat 12 wolt

Brand:Armacost Lighting

3.7/5

zł
368.54

Aby uzyskać optymalną wydajność ściemniania prądem zmiennym, użyj ściemniacza z fazą przesuniętą w stylu CL lub równoważnego. Użycie odwróconej fazy lub ELV może pogorszyć wydajność ściemniania. Napięcie wejściowe: 100-120 V AC 50/60 Hz, λ=0. 65C, napięcie wyjściowe: stałe napięcie 12 V DC, 24 waty, maks. 2 a. Współpracuje z niskonapięciowymi ściemniaczami Armacost i kontrolerami kolorów RGB. Kompatybilny z ZARÓWNO 120-woltowymi ściemniaczami prądu zmiennego i sterownikami oświetlenia, jak i niskonapięciowymi ściemniaczami i sterownikami prądu stałego. Zapewnia płynne, pełne ściemnianie bez migotania dla 12-woltowych lamp LED, takich jak taśmy LED, moduły, listwy świetlne, krążki i inne taśmy LED.

Kwota
Dodaj do koszykaKup Teraz

EAN: 0850080006047

Kategorie Narzędzia i ulepszenia domu, Oświetlenie i wentylatory sufitowe, Akcesoria oświetleniowe, Transformatory niskiego napięcia,

Aby uzyskać optymalną wydajność ściemniania prądem zmiennym, użyj ściemniacza z fazą przesuniętą w stylu CL lub równoważnego. Użycie odwróconej fazy lub ELV może pogorszyć wydajność ściemniania. Napięcie wejściowe: 100-120 V AC 50/60 Hz, λ=0. 65C, napięcie wyjściowe: stałe napięcie 12 V DC, 24 waty, maks. 2 a. Współpracuje z niskonapięciowymi ściemniaczami Armacost i kontrolerami kolorów RGB. Kompatybilny z ZARÓWNO 120-woltowymi ściemniaczami prądu zmiennego i sterownikami oświetlenia, jak i niskonapięciowymi ściemniaczami i sterownikami prądu stałego. Zapewnia płynne, pełne ściemnianie bez migotania dla 12-woltowych lamp LED, takich jak taśmy LED, moduły, listwy świetlne, krążki i inne taśmy LED.
Batteries Included? ‎No
Batteries Required? ‎No
Brand Armacost Lighting
Capacity Description ‎24 Watt
Certification ‎CSA, FCC, ETL
Color ‎White
Country of Origin ‎China
Current Rating 2 Amps
Customer Reviews 4.7 4.7 out of 5 stars 788 ratings 4.7 out of 5 stars
Included Components ‎24-Watt power supply
Is Discontinued By Manufacturer ‎No
Item Dimensions LxWxH 6 x 2.25 x 0.75 inches
Item model number ‎840240
Item Package Quantity ‎1
Item Weight ‎8 ounces
Manufacturer ‎Armacost Lighting
Material ‎Plastic
Maximum Frequency 60 Hz
Number Of Pieces ‎1
Part Number ‎840240
Pattern ‎Lighting
Power Source AC
Power Source ‎AC
Product Dimensions ‎6 x 2.25 x 0.75 inches
Shape ‎Rectangular
Size ‎24 Watt
Special Features ‎Detachable Cord
Style ‎12 Volt
Type of Bulb ‎LED
Usage ‎ETL Listed for dry and damp location use
Voltage ‎12 Volts
Warranty Description ‎Limited 3-year warranty. This product is for dry and damp locations.
Wattage ‎24 watts

3.7

8 Review
5 Star
83
4 Star
10
3 Star
2
2 Star
2
1 Star
3

Napisz recenzję

Twój e-mail nie zostanie opublikowany. Wszystkie pola obowiązkowe są oznaczone symbolem*

Scritto da: Thomas H.
Had to replace a unit in the kitchen, and this works perfectly
My under cabinet lights stopped working. Changed the dimmer switches, but it finally was the transformer. All good now.
Scritto da: PVM
Does what it's supposed to
Easy installation. I wired directly to a dimmer switch and it works perfectly.
Scritto da: S.C. Fluhr
Smooth dimming led driver
Quality made, nice and compact, works as advertised
Scritto da: paul
Electrician approved
One of the few LED drivers that can be dimmed in compliance with the NEC for electrical inspection. The cord that came with it can be unscrewed and the driver can be hardwired with 14-2 romex. The connections are circuit board terminal blocks on each end, so they required a jeweler screwdriver. Be sure to hold the blocks when tightening the screws, so the block doesn't torque off the circuit board. The unit does soft start and ramp to full in 1 sec. Other than that, there isn't a 3 sec delay to warm up like cheap switching power supplies have before they instantly pop on at full brightness. That's nice. I had no problem using a z-wave smart dimmer. I used the a Linear aka Nortek aka GoControl model WD500Z5 zwave dimmer and it successfully burned in so far for 1 day. It does get very warm, even pushing only 10 watts. Like a hot McDs coffee cup hot. Not too hot to start papers on fire, but too warm to be comfortable holding. Plan for that when mounting. Also, If you wired several LED homeruns instead of daisy chaining the runs, be sure to plan on wirenuts or a terminal block to connect to the driver- it only has internal room for 1 #12 pair of wires. You have no internal room for other connections. I powered 10 watts of LED under cabinet LED tape. The cables in the pic are 14-2 romex and 16-2 cl2 riser cable. No issues with those gauges.
Scritto da: Snap, Crackle and Pop
A high-quality dimmable, "universal" 120V to 12V DC LED driver power supply
The Armacost Lighting 840600 is a high quality, dimmable power supply for 12V LED fixtures or systems. COMPATIBILITY: This power supply should be compatible with a wide range of 120V dimmers. The installation instructions state the following: "Armacost Dimming LED Drivers are compatible with both forward phase (leading edge, triac, incandescent) and reverse phase (electronic low-voltage, ELV, and trailing edge) AC dimmers ... They are also compatible with low-voltage PWM dimmers and RGB color controllers. "Although virtually all dimmers will work with Armacost Dimmable LED Drivers, Armacost Lighting recommends dimmers that can be programmed or have an adjustment dial to set the low end dimming range." BUILT IN CONNECTORS: The built in connectors work well and quickly. They need to have some of the outer insulation to clamp onto, to keep the stress of any pull on the wire from going to the terminal connection itself. So don't strip too much of the inner or outer insulation. LOW MINIMUM POWER LOAD: The minimum power load is just 5 watts. VOLTAGE: Output is 12V DC. DIMENSIONS: It's somewhat large, at 7-1/16 inches long by 2-3/8 inches wide by 1-3/8 inches high. ENCLOSURES: If you want an enclosure, Armacost makes variations with enclosures for conduit connections. The only real negative is the cost, though of course having a high-performing, high quality power supply makes it a reasonable value. Lower-watt drivers are less expensive than this one. The manufacturer's website has lots more info, including specs and installation instruction. TWO WARNINGS: First, be sure to get a power supply rated with enough watts to cover your needs. Second, be careful to get a power supply with the right input voltage. Armacost makes a line of 12V dimmers and matching power supplies. This product is the universal power supply, to be used with a range of dimmers and 120V.
Scritto da: CAMPFIRESKY
NEW KITCHEN SINK LIGHTING
Very easy to install. I hard wired the power pack and also installed a dimmer switch. Works perfectly with no humming. Great product.
Scritto da: Kindle Customer
Everything I wanted at a reasonable price
Put in a dimmer switch and get the 120 leds per meter. You can crank it up to give all the light you will ever need and yet dim it down to simply add ambience to your kitchen. I installed them in the channel with the diffusers and absolutely love them.
Scritto da: Nick
It actually works with a dimmer!!
Wow an LED driver / power supply that actually dims the LEDs!!! I thought there was something wrong with my LEDs or dimmer as I tried two different PLUSPOE dimmers that did not actually dim anything and also buzzed. This driver actually works, and works well. I am using the 12v/24watt one to drive 8x half moon 12v LED stair lights. I am also using a Leviton 6674 dimmer in the wall. There is no switching noise from this driver, the construction is solid and the dimming is smooth without flicker. Completely worth the higher price than non certified drivers. The only thing that was odd is that it did not come with a power cord. The lack of a power cord was not a big deal as I had one laying around, but I could see it bothering other people. I have a light switch controlling half of a receptacle in low voltage box, so I did need one.

Produkty powiązane

hot
Transformator
0.1/5

zł 1089.27

Transformator
0.1/5

zł 1089.27

hot
HitLights ściemnialny sterownik LED 12V 40W(3.4A), magnetyczny transformator zasilający 120VAC do 12VDC, kompatybilny ze ściemniaczami Lutron i Leviton, do oświetlenia taśmowego LED, kuchnia, szafka, klasa 2, UL Listed 40W 12V IP67 z Jbox
3.6/5

zł 602.66

HitLights ściemnialny sterownik LED 12V 40W(3.4A), magnetyczny transformator zasilający 120VAC do 12VDC, kompatybilny ze ściemniaczami Lutron i Leviton, do oświetlenia taśmowego LED, kuchnia, szafka, klasa 2, UL Listed 40W 12V IP67 z Jbox
3.6/5

zł 602.66

hot
Seagull 98745S-12 Wtórny transformator elektroniczny, czarny
0.1/5

zł 930.74

Seagull 98745S-12 Wtórny transformator elektroniczny, czarny
0.1/5

zł 930.74

hot
Kichler 15M100AZT Standardowy transformator serii 100 W Ręczny, teksturowany Brąz architektoniczny 100 W
2.8/5

zł 920.33

Kichler 15M100AZT Standardowy transformator serii 100 W Ręczny, teksturowany Brąz architektoniczny 100 W
2.8/5

zł 920.33

hot
Armacost Lighting 841200 120-Watt Dimming Led Driver 12-Volt DC Power Supply, Szary 12 V
3.7/5

zł 586.06

Armacost Lighting 841200 120-Watt Dimming Led Driver 12-Volt DC Power Supply, Szary 12 V
3.7/5

zł 586.06

hot
HitLights 25W ściemnialny transformator sterownika LED, zasilacz 120V AC do 12V DC, kompatybilny ze ściemniaczami Lutron Leviton, do lamp LED, projekty LED o stałym napięciu, lista ETL 12V 25W
3.6/5

zł 309.34

HitLights 25W ściemnialny transformator sterownika LED, zasilacz 120V AC do 12V DC, kompatybilny ze ściemniaczami Lutron Leviton, do lamp LED, projekty LED o stałym napięciu, lista ETL 12V 25W
3.6/5

zł 309.34

hot
Awaryjny sterownik LED Iota 10 W do opraw LED klasy 2. Stała moc wyjściowa. Uniwersalne wejście 120-277 V. Automatyczne wykrywanie napięcia przewodzenia 10-60 VDC. Obudowa ze stali ocynkowanej, akumulator niklowo-kadmowy 24 cale
0.1/5

zł 1441.46

Awaryjny sterownik LED Iota 10 W do opraw LED klasy 2. Stała moc wyjściowa. Uniwersalne wejście 120-277 V. Automatyczne wykrywanie napięcia przewodzenia 10-60 VDC. Obudowa ze stali ocynkowanej, akumulator niklowo-kadmowy 24 cale
0.1/5

zł 1441.46

hot
Jednowyjściowy zasilacz sterownika LED MEAN WELL, 250 W 2,1 A @ 59-119 VDC - HLG-240H-C2100A
3.7/5

zł 575.85

Jednowyjściowy zasilacz sterownika LED MEAN WELL, 250 W 2,1 A @ 59-119 VDC - HLG-240H-C2100A
3.7/5

zł 575.85

Odkryj naszą międzynarodową sieć

Wysyłamy do 28 krajów, ponad 200 000 produktów. Bądź na bieżąco, zapisz się do newslettera.

Array

Całkowity:zł 0.00

Zobacz koszykWymeldować się

Kategorie

Wszystkie kategorie
Menu Kategorie W pobliżu Wózek

Menu