Neiko 30263A - 6-calowe tarcze szlifierskie mocowane na rzep, trzpień 5/16” z 24 mocowaniami gwintowymi, 10 000 obr./min, talerze szlifierskie do szlifierki oscylacyjnej i szlifierki DA, podkładka mocująca na rzep 6 na rzep

Name: Neiko 30263A - 6-calowe tarcze szlifierskie mocowane na rzep, trzpień 5/16” z 24 mocowaniami gwintowymi, 10 000 obr./min, talerze szlifierskie do szlifierki oscylacyjnej i szlifierki DA, podkładka mocująca na rzep 6 na rzep
Brand: Neiko
SKU: 0837013302636
Price: 141.88 PLN
Availability: InStock

Brand:Neiko

3.7/5

zł
141.88

6-calowy talerz szlifierski NEIKO 30263A z haczykiem i pętelką jest idealny do projektów związanych z obróbką drewna, motoryzacją i przemysłem. Działając z prędkością 10 000 obr./min, nasza tarcza szlifierska zapewni spójne i gładkie wykończenie, pożądane w przypadku Twoich projektów. Łatwy i wygodny system podkładek umożliwia użytkownikowi błyskawiczną wymianę podkładki szlifierskiej na szlifierce oscylacyjnej lub DA! Standardowy trzpień 5/16” pozwala na użycie we wszystkich modelach szlifierek o tej specyfikacji.

Kwota

Dodaj do koszyka Kup Teraz

EAN: 0837013302636

Kategorie Przemysłowe i naukowe, Produkty ścierne i wykończeniowe, Koła i dyski ścierne, Podkładki pod tarcze szlifierskie,

SPECYFIKACJE: Ten uniwersalny standardowy rozmiar tarczy szlifierskiej i podkładowej to 6 x 5/16 z 24 gwintami i mocny ze sztywnym korpusem, który pasuje do większości szlifierek pneumatycznych do obróbki drewna, prac motoryzacyjnych i przemysłowych. WSZECHSTRONNE ZASTOSOWANIA: Ta tarcza szlifierska może być używana z wieloma innymi tarczami do wtapiania, usuwania zarysowań, usuwania farby i przygotowania farby. WYSOKIEJ JAKOŚCI MATERIAŁ DO SZLIFOWANIA: Każda 6-calowa tarcza szlifierska jest wykonana z wysokiej jakości materiału poliuretanowego, który jest lekki i umożliwia elastyczny, ale mocny dotyk bez uczucia sztywności, co zapewnia maksymalną kontrolę i wydajność podczas szlifowania. WYSOKA WYDAJNOŚĆ: Te podkładki szlifierskie są szybkie i trwałe, a prędkość oscylacji wynosi 10 000 obr./min i wytrzymuje wysoką częstotliwość, zapewniając spójne i gładkie wykończenie projektów domowych lub samochodowych i nie tylko. PODKŁADKA SZLIFUJĄCA NA HOOK-AND-LOOP: Konstrukcja powierzchni czołowej z haczykiem i pętelką zapewnia łatwe zamykanie w celu usunięcia tarczy bez zużywania ogólnej wytrzymałości dla wygody i łatwego montażu/demontażu na szlifierce orbitalnej lub dwukierunkowej DA.

Brand	Neiko
Color	Random
Country of Origin	China
Is Discontinued By Manufacturer	No
Item model number	30263A
Manufacturer	Ridgerock Tools Inc.
Material	Polyurethane, Polyvinyl Chloride
Number of Items	1
Product Dimensions	5.91 x 1.18 x 7.48 inches; 6.56 Ounces
Special Feature	Lightweight, Strong

5 Star

4 Star

3 Star

2 Star

1 Star

Napisz recenzję

Twój e-mail nie zostanie opublikowany. Wszystkie pola obowiązkowe są oznaczone symbolem^*

Twoja ocena

Scritto da: JOSEPH S. LAMBERT JR

inside curves on delicate featheredge operations are easy to control with flexible pad

soft and flex able

Scritto da: Rae B. Parks

Work great

They work great and are a good value

Scritto da: brian t

Works like the original

Excellent replacement

Scritto da: Bobo

So far so good. Velcro adhesion is terrific, really holds onto pad.

Overall good. Noted a small area that seemed to have been repaired on one edge of the pad, but it does not seem to influence the nature or use of the pad.

Scritto da: ChemE_75

Good replacement so far

This is my 3rd disc pad replacement. The urethane foams typically used don’t hold up in humid So Flo it seems. Original pad lasted nearly 20 years when I lived in Maine. A few years in FL and it disintegrated. I got a 5 hole standard electric pad that lasted 4-5 yrs just recently coming apart. I got this pad and so far it’s working well, it’s a bit firmer but I like it. Been doing a good job on mostly flat cherry I glued up for a bed headboard. Also did some 150-180 grit sanding on the turned posts. A softer pad would be better but I managed ok and the round posts look good. The old porter cable sander is built like a tank and runs great, so it’s good there are 3rd party replacements at reasonable cost. It looks like it’s a quality foam, but only time will tell if it’s more durable. Update - 6 weeks of fairly regular use and it’s holding up well. Most all my psa discs are solid, no vac holes so I don’t need the perforated discs. The add-on vac attachment for my old P-C is like a shroud over the disc area and it works well enough without the holes. I have nothing planned after this project so will be interesting to see if the foam lasts longer than the previous pad when sitting in storage.

Scritto da: Aaron

Works good for DA use

I bought this to use with my DA with 2000 grit has worked exactly how I wanted it to

Scritto da: Mike. R

Amazingly fast results

I've been claying my cars for years using, as you might expect, clay bars. Recently I've been getting fine particulates in the paint of all my cars, almost like a paint overspray. Polishing hasn't helped, and claying this off the pain has been a ton of work even in small areas. It took me 45 minutes to finish the hood of a black Fiat 500 using standard clay. Because this was so labor intensive I thought I'd order a clay wheel I could use with my Porter Cable polisher. When this arrived I decided to try it by hand just to see how it compared, and holy cow! Even by hand this cuts far, far better than my clay bar. I did the trunk and rear fenders of my BMW Z3 in literally 2 minutes. By hand. Just spray with your favorite lubricating finisher or use soapy water. I could not believe how smooth and consistent the results were in basically 2-3 swipes over an area. I'm not sure I'll use this with the polisher now. I might just use it by hand it's so easy. I HIGHLY recommend this clay pad.

Scritto da: Hot Rod

Good product

Exactly what I needed

Scritto da: FERNANDO JOSE TEIXEIRA

Very good

Bought to replace thr original pad of my Dewalt sander that costs 80 dollars, and Neiko fits and work very well

Scritto da: PGF4

Have not used yet.

Pads are well made and packaged. Are not as ridged as my original pad, which I prefer.

Scritto da: Imightberiding

Good value

What can I say about backing pads other than firmness, durability, balance & cost/value? These pads check all the boxes. But them, you won't be disappointed. At least I am not. Top marks all around.

Scritto da: Den G.

Wish they would last longer

This is a very good product, for a very good price, but being what they are, a nice soft medium to attach to electric or air powered random orbital sander that can oscillate over flat or round/curved surfaces to be sanded with either heavy or fine sanding material, they have to be flexable where they touch the surface, this makes the flexing around the edges extremely prone to vibrations and flexing at thousands of times a minute especially when using 125PSI air driven random oscillating machines like the Ingersol Rand type of sanders which are an excellent machine for doing curved surfaces. This is a very good product, maybe someone will develop a new flexable membrane someday to replace the yellow foam to make the product a five-star go-getter. Regards Den..

Scritto da: . Chris.

WILL REPLACE YHE RIDGID R.O. SANDER PAD NO LONGER AVAILABLE FROM HOME DEPOT.

This product was purchased to replace the 6 inch orbital sander backing from Home Depot. Home Depot no longer supplies parts for their product. With the creation of a flat wrench to slide between the pad and the new part I was easily able to rethread the original bolt hole and screw in the new and much less expensive replacement pad ( About 20% of the cost of the Ridgid product if it was available. The sander does an excellent job but needs the tooth surface replaced every few hundred hours.