Małe części Nylon 6/6 Płaska podkładka, gładkie wykończenie, kremowa biel, rozmiar otworu 1/4, średnica wewnętrzna 0,28, średnica zewnętrzna 0,74, grubość nominalna 0,06 (zestaw po 100 sztuk) 1/4 0,280 cala 0,740 cala cala 0,060 cala cala 100

Name: Małe części Nylon 6/6 Płaska podkładka, gładkie wykończenie, kremowa biel, rozmiar otworu 1/4, średnica wewnętrzna 0,28, średnica zewnętrzna 0,74, grubość nominalna 0,06 (zestaw po 100 sztuk) 1/4 0,280 cala 0,740 cala cala 0,060 cala cala 100
Brand: Small Parts
Price: 171.25 PLN
Availability: InStock

Brand:Small Parts

3.6/5

zł
171.25

Poczuj wagę, zbadaj przyczepność i graj jak zawodowiec z piłką do softballu USASB Thunder Hycon Slowpitch. Zaawansowana technologicznie piłka zapewniająca doskonałą grę, jest to piłka do gry w zwolnionym tempie.

Kwota

Dodaj do koszyka Kup Teraz

EAN:

Kategorie Przemysłowe i naukowe, Gwoździe, śruby i elementy złączne, Podkładki, Podkładki płaskie,

Nylon 6/6 zapewnia odporność na ścieranie, korozję i wiele chemikaliów, nie przewodzi prądu i jest mocnym, ale lekkim tworzywem sztucznym. Podkładka płaska zapewnia powierzchnię nośną dla rozkładu obciążenia łącznika lub pełni rolę elementu dystansowego.

Exterior Finish	Nylon
Fastener Size	1/4"
Item model number	FSCC15266
Manufacturer	Small Parts
Material	Nylon
Outside Diameter	0.740' Inches
Package Dimensions	4.7 x 3.9 x 0.4 inches; 0.01 Ounces
Washer Type	Flat

5 Star

4 Star

3 Star

2 Star

1 Star

Napisz recenzję

Twój e-mail nie zostanie opublikowany. Wszystkie pola obowiązkowe są oznaczone symbolem^*

Twoja ocena

Scritto da: CookieMonster

nylon washers don't look like the product pictures. The description says how thin they are though

I bought a set looking at the pictures but double checked and saw afterwards that the pictures are more like a standard washer size but the actual product is more in line with a split washer size. It's just a bunch of small slices of a thin wall nylon spacer. It'll probably work for the project I had in mind but I was a bit disappointed since I skimmed over the description: 0.66" ID, 0.85" OD.

Scritto da: Maryse Germany Delepine

Good product

For glass fixtures

Scritto da: Melvin Nicholas

Nylon 6/6 Flat Washer,

This product may work for others who have uses for it ; the product that I received was not thick as the 1/8" was suppose to be. It was so then until I can holly see it ; I am not please with it :

Scritto da: My honest opinion

As expected

Very thin nylon washers

Scritto da: Denis Pelletier

Helps keep it together.

Had a piece of some tripods that kept falling off. These are thin enough and worked to keep it from falling off. Perfect solution.

Scritto da: A.T.

Almost Perfect - But One Side Is Rough

Positives: These nylon washers are exactly the size I'd hoped they would be. The package arrived quickly and undamaged. Negative: One side is rough. I had expected both sides to be smooth, like the ones I'd bought at a hardware store. This is not the end of the world for my purposes, but it is something that might matter to others.

Scritto da: AY

85 of 100 washers

I was disappointed that there were only 85 of the 100 washers in the package.

Scritto da: KGDC

exactly as descrobed

Exactlys as described when I got it & worked well for seperation and insulation purposes

Scritto da: Glenn Schulz

Blue Ox Tow Bar

Perfect fit for my Blue Ox Towbar. Tightened everything up nicely.

Scritto da: Melliott

Good quality nylon washer

I used these washers to level deck railing posts on a textured pavers. Worked well but not perfect. I really had to tighten the lags to the max to deform the washers to conform to the uneven surface.

Scritto da: Calmudgeon

As described. Timely shipping.

I used these as spacers between legs and hardware on a convertible crib I was building to avoid damaging the wood. They fit the bill nicely. I was pleasantly surprised how quickly they arrived.

Scritto da: Allan A.

Seller's description accurately describes deleivered product

Washers were of consistent (good) quality. Amazon fufilled a total of 300 washers in two separate orders. Both orders arrived in less than one week, via Canada Post. Very satisfied with product and service.

Scritto da: Mike G.

Just right

Just what I needed for my hydrogen separator project.