Lippert 285325 Podnośnik nożycowy 24, czarny 24 cale Pojedyncze opakowanie

Name: Lippert 285325 Podnośnik nożycowy 24, czarny 24 cale Pojedyncze opakowanie
Brand: Lippert Components
SKU: 0848150002020
Price: 647.86 PLN
Availability: InStock

Brand:Lippert Components

3.7/5

zł
647.86

NIEZAWODNA WYTRZYMAŁOŚĆ — Ten podnośnik nożycowy ma udźwig do 5000 funtów na podnośnik. BEZPIECZNA INSTALACJA — Nasze zestawy podnośników nożycowych są dostarczane w komplecie ze wszystkimi elementami montażowymi potrzebnymi do montażu przykręcanego na siodło, przyczepie turystycznej lub przyczepie towarowej/użytkowej. ZAKRES ROZSZERZENIA — Podnośnik nożycowy rozciąga się maksymalnie do 24” i chowa do 4-1/4” w celu kompaktowego przechowywania, gdy nie jest używany. EKONOMICZNE ROZWIĄZANIE — Niedrogi i wyjątkowo niezawodny zestaw podnośnika nożycowego jest niezbędny, jeśli wymieniasz stary lub uszkodzony podnośnik stabilizatora. TRWAŁA KONSTRUKCJA — Wytrzymała konstrukcja z czarnym, malowanym proszkowo wykończeniem i powierzchnią zapobiegającą rdzy, która pozwala wytrzymać zużycie podczas podróży kamperem.

Kwota

Dodaj do koszyka Kup Teraz

EAN: 0848150002020

Kategorie Automobilowy, Części i akcesoria do samochodów kempingowych, Poziomowanie i stabilizacja, Jacki,

Brand	Lippert Components
Brand	‎Lippert Components
Color	‎black
Country of Origin	‎China
Customer Reviews	4.6 4.6 out of 5 stars 1,164 ratings 4.6 out of 5 stars
Item Dimensions LxWxH	‎33.5 x 11.25 x 4.75 inches
Item model number	‎285325
Item Weight	‎14.52 Pounds
Load Capacity	5000 pound
Load Capacity	‎5000 pound
Manufacturer	‎Lippert Components
Manufacturer Part Number	‎285325
Material	Alloy Steel
Material	‎Alloy Steel
Maximum Lifting Height	24 Inches
Maximum Lifting Height	‎24 Inches
Model	‎285325
Product Dimensions	‎33.5 x 11.25 x 4.75 inches
Special Features	‎Mounting base dimensions: 10-1/4" long x 3-1/4" wide, Height: Collapsed: 4-1/4", Extended: 24", Collapsed length: 26-3/16", Large bolt hole dimensions: 11/16" long x 7/16" wide, Small bolt hole diameter: 5/16"
Style	‎Single Pack
Vehicle Service Type	Trailer
Vehicle Service Type	‎Trailer

5 Star

4 Star

3 Star

2 Star

1 Star

Napisz recenzję

Twój e-mail nie zostanie opublikowany. Wszystkie pola obowiązkowe są oznaczone symbolem^*

Twoja ocena

Scritto da: Erin Glenn

Worth The Money

Jacks were well worth the Money, Bigger and heaver than Jacks that came on the camper, very pleased

Scritto da: Gordon Vancouver ,wa

BEST IN THE INDUSTRY

JUST REPLACED ONE WHY ?? BECAUSE I DIDN'T USE IT AS RECOMMENDED

Scritto da: mike333

I wouldn't put 5k pound load on one of these.

These are affordable and flimsy. The jacks perform ok if they are on a perfectly flat surface to support a perfectly stable trailer. Any angle introduced at all will have these jacks twisting in a scary way. I would feel safe using these at 1/2 to 1/3 of their stated capacity. The handle included also twists and bends while putting a load on the jacks. I don't expect it to last much longer than a week.

Scritto da: R. G. Godbold

Lippert 285344 30" Scissor Jack

The media could not be loaded. It's a good, normal, sturdy scissor jack; it does the job. It stops the up/down motion as expected. It does not do much for controlling lateral movement (also, as expected). I love the circle shaped mount plate, because it let me mount it at a 45 degree angle. I think it gives a slight advantage to lateral stability, but the main reason I did that was so when the jack is retracted, the end doesn't stick out from under the trailer. That's one less thing to worry about when in a tight spot. I mounted them directly to the I-beam instead of the awful location that the RV manufacturer did: on the bumper. Now they're low profile, and if a bad road makes the tail drag on the ground, the bumper will hit long before these do. Since they're 30", they'll contact the ground long before they fully extend (which is what you want), but I still use blocks. After the pilot hole was drilled, I used a 11/32" drill bit for the final hole and then the supplied self-threading bolts went in fine. Between these, and my SteadyFast stabilizers (which I kept from my last trailer), I've had to drill 32 holes into RV I-beams (24 for mounting the SteadyFast twice, and 8 for these). The pilot hole makes all the difference; don't skip it!

Scritto da: Rodney

Sturdy product

Arrived fast and item was just as described. Only negative it the bolt holes on top do not line up with existing/standard pattern bolt holes on the camper. Had to drill new holes but working g perfect now

Scritto da: G. P. Hawkins

Good solid stabilizer, easy to install

I used this stabilizer jack to replace one I damaged (it wasn’t all the way up when I moved the trailer). The replacement was easy to install. It took about 45 minutes to complete because of the need to move JT Strongarm hardware from the old one to the new one. Actual installation was removing 3 screws and one bolt (each RV maker differs) and then reversing the process. Make life easier by lowering the old jack so it doesn’t fall when unscrewed and raise the new one to just touch when installing it. The 5,000 pound version has a top round mounting plate that is slightly flimsier than I would prefer. I might consider removal of all the stabilizers and braze a stiffer top mounting plate on, in order to reduce trailer shaking.

Scritto da: Angela Fleming

Scissor Jacks

These are just what my camper needed. They were delivered sooner that expected. I am very pleased

Scritto da: Rick Shurock

Nice scissor Jack

Nice Jack. Easy install. Would’ve been 5 stars but it contained no mounting hardware.

Scritto da: jeff

Fonctionne très bien pour ma fifthwheel

Utilisé pour mon vr

Scritto da: jakewash

Good but could be better

Extra long 30 inch length is great for added strength and stability. Having said that, the arms are a little weak, could use a thicker steel for even more stability.

Scritto da: PATRICK PEPIN

Tres satisfait

Réponds a mes attente

Scritto da: Sully

Thanks

Perfect

Scritto da: Kevin

Defective

Failed after second use. Supplier sent a replacement and charged me for the replacement