Lampa biurkowa LED MOFFATT z magnesem, 24 przegubowe elastyczne ramię na gęsiej szyi, ultra jasne magnetyczne światło robocze, lampa robocza, 100 watów, 1690 surowych lumenów, 95021, czarny (wyprodukowano w USA)

Name: Lampa biurkowa LED MOFFATT z magnesem, 24 przegubowe elastyczne ramię na gęsiej szyi, ultra jasne magnetyczne światło robocze, lampa robocza, 100 watów, 1690 surowych lumenów, 95021, czarny (wyprodukowano w USA)
Brand: Moffatt
Price: 743.26 PLN
Availability: InStock

Brand:Moffatt

3.2/5

zł
743.26

Uprość swoje projekty ulepszeń domowych i utrzymuj ciśnienie wody regulowane w dowolnym środowisku komercyjnym lub mieszkaniowym dzięki temu zaworowi regulacyjnemu wody z podwójnym złączem. Ten domowy zawór regulujący ciśnienie pomaga regulować ciśnienie wylotowe w zastosowaniach komercyjnych i mieszkaniowych oraz posiada opatentowaną konstrukcję pojedynczego wkładu, która umożliwia serwisowanie bez konieczności demontażu korpusu zaworu. Ten domowy zawór regulujący ciśnienie wody ma innowacyjną konstrukcję typu „push to connect”, która pozwala na szybką i łatwą instalację i nie wymaga żadnych dodatkowych narzędzi. Idealny do stosowania w ciasnych przestrzeniach, ten reduktor ciśnienia można zainstalować na mokrych przewodach i jest wyposażony w numeryczny wskaźnik zegarowy, który pokazuje ciśnienie, eliminując potrzebę stosowania manometru. Regulator ciśnienia wody ma wartość znamionową 45 PSI, można go łatwo regulować w zakresie od 20 do 90 PSI i jest kompatybilny z rurami PEX, miedzianymi, CPVC, PE-RT i HDPE.

Kwota

Dodaj do koszyka Kup Teraz

EAN:

Kategorie Narzędzia i ulepszenia domu, Materiały budowlane, Oświetlenie miejsca pracy,

Wyjątkowo trwały: przetestowany pod kątem wydajności w większości środowisk; pokrycie winylowe stanowi fizyczną barierę dla zanieczyszczeń; świetna lampa architektoniczna, lampa kreślarska lub uniwersalna lampa biurkowa do montażu. Lepszy zasięg: Przewód o klasie jakości 18 AWG z certyfikatem Underwriter Laboratories do 105 stopni C i uziemioną wtyczką; długość 6 stóp pozwala na duży zasięg w miejscu pracy z długowiecznością i bezpieczeństwem. Bezpieczna praca: nasz chłodny w dotyku klosz z podwójnymi ściankami zapobiega poparzeniom podczas regulacji, a stożkowy odbłyśnik zapewnia skupione światło; Przełącznik typu dźwigniowego umieszczony na górze klosza z aluminiowym radiatorem, aby zmaksymalizować żywotność żarówki LED i przełącznika. Oświetl swoją przestrzeń: Elastyczne ramię wahadłowe o długości 24 cali; regulacja obrotu naszego elastycznego ramienia w kloszu i podstawie zapewnia absolutnie optymalne ustawienie światła bez opadania. Zamontuj na miejscu: elastyczną lampę LED z podstawą magnetyczną; to elastyczne ramię z gęsią szyją można łatwo zamontować na metalowych powierzchniach za pomocą podstawy magnetycznej o średnicy 3 cali i udźwigu 100 funtów; to elastyczne ramię, które pozostaje tam, gdzie je położysz.

Brand	Moffatt
Color	Black
Country of Origin	USA
Domestic Shipping	Item can be shipped within U.S.
International Shipping	This item can be shipped to select countries outside of the U.S.
Item model number	95021
Light Source Type	Halogen
Manufacturer	Moffatt Products Inc
Material	Aluminum, Polycarbonate
Product Dimensions	24 x 5 x 6 inches; 3 Pounds
Special Feature	adjustable

5 Star

4 Star

3 Star

2 Star

1 Star

Napisz recenzję

Twój e-mail nie zostanie opublikowany. Wszystkie pola obowiązkowe są oznaczone symbolem^*

Twoja ocena

Scritto da: James J.

It's very flexible

Awesome task light .I like the magnetic end. It'll stick to anything steel.

Scritto da: BobBerner

It's a classic

Great lamp, versatile can be moved from tool to tool until you can buy one for each tool you want a light. Used on Lathe, Drill Press, and Bandsaw. One can never have enough light. A plus for me is that you can put any standard bulb yo like in the thing.

Scritto da: Noah Wallace

Good lamp, not LED

You need a bulb for it to be an LED lamp. You would also need a bulb to have any concept of lumen output. It doesn't come with a bulb, misleading title. However, it is very sturdy and the magnetic base works well on my bandsaw.

Scritto da: mark hepburn

Good but not great

This is a pretty good lamp but there is room for improvement. I bought it to use at my VB36 lathe and got the model with the magnetic base. It arrived as expected and in good condition, etc. I also installed a 27W LED lamp which is the equivalent of about a 150 watt bulb but without the heat of incandescent. The lamp is rated at 100 W but they refer to a traditional 100 W incandescent, which produces a ton of heat. So anyway, the lamp is pretty good overall but a few thougths on why the 4- stars instead of 5. Pros: The switch is mounted on the back of the housing and is large and easy to see / use. The cord is reasonably long. The magnet works pretty well in most conditions The arm is flexible and is 24" long Cons: The arm is extremely stiff and you can't just adjust on the fly if you need to. It's a two-handed task When adjusting the arm, the magnet won't hold unless you are using the aforementioned 2 hands The housing is plastic. Perhaps some type of high-impact product, but just seems flimsy and I'd prefer metal It's pricey for what it is. Still, it's a great workhorse lamp for my needs and if there was one with a 30+ inch arm I'd grab it. I just question its long-term durability in a workshop environment. And they are heavily targeted at that market so I just think that the build quality should be a tad better.

Scritto da: J. Morbit

Very nice light, it stays where you aim it.

This Moffatt 95021 Task Lamp is the best gooseneck lamp I have ever worked with. The neck is very rigid and stiff, in a good way. I accidentally ordered the light with the magnetic base instead of the c-clamp base and I realized that neither my work table nor any of my lapidary machines have any magnetic metal on them, they are aluminum, resin and wood. So I was in a bit of a fix as to how to use the light for the magnetic base cannot support the light on its own. I thought about ordering the c-clamp base from Moffatt but it would have been around $30 with tax and shipping and I would have had to wait a week to get the new base. I found a much better alternative in a 10lb Olympic weight from a large sports store in town for a mere $10. The magnet I sticks very well, enough to lift the 10lb weight with no problem, and it actually looks very good as a base, almost like it was made for it. They should include a 10lb weight with the magnetic base.

Scritto da: Jim Palmer

Maybe they should inspect the magnetic bases before shipping to verify the pull strength.

I spent the extra $35 on this task lamp, because reviewers of other products have been disappointed about the strength of the magnetic base. The manufacturer claims the base to have 100 pound of magnet strength or pull force on metal. Mine must have missed the inspection, I doubt it can muster up 20 pounds. I attached it on the vertical side of my bandsaw and it just drifted down and would not support the 24 inch arm and lamp holder. Another reason I purchased it over the others is the toggle switch rather than the twist ones on cheaper models. If you are lucky enough to get one with the advertised pull strength, I think you will be happy. However, the 24 inch arm is a bit much, could do with 18 inches. If you get one with an underpowered magnet, then do what I did and order a magnet to attach to the inside opposing the lamp base and it will hold in place. I put a 100 watt equivalent LED and have plenty of light. It also is positioned in a place to remind me to release the tension and unplug the saw after use.

Scritto da: Mike Pippin

Great light

Not sure why people complain about the magnet. It is very strong. Likely they are attaching to thin sheet metal. I bought one 10 years ago and it’s nearly identical to the one I just bought, so not sure why some are complaining about the plastic switch mount. Mine has stood the test of time on my bandsaw for a decade and has been invaluable. It’s pricey, but a great light.

Scritto da: BigRedDog

Not What I Needed, But Solid Product

I personally don't think the magnet-base is powerful enough for how rigid the gooseneck arm is. I appreciate the rigidity as the lamp holds in place very well. However, whenever I attempt to adjust the lamp, the magnetic base breaks free and the lamp comes loose. I am placing it on a pretty thick and solid metal base. I'm sure this is a good product for some, not quite what I wanted. The arm could loosen up over time, but I'm not sure that is what I really want. The bulb cover is plastic not metal, and the switch is oddly located at the top of the lamp (which I can see in the picture but mistook for something else). Overall a solid product that was not right for my application.