Kompletny ciągnik 1113-2005 zespół stabilizatora kompatybilny z/zamiennik dla ciągnika Ford Holland-D9Nnb856Bb, czarny

Brand:Complete Tractor

3.2/5

821.33

**Sprawdź, czy część pasuje przed zakupem** Dane techniczne: Opis: Długość zespołu stabilizatora: 17 - 23 1/2 Średnica wewnętrzna: 3/4 Uwagi: W/kołek, szekla i sprzęgło. Bez wsporników i śrub w kształcie litery U. Ustaw od 17 do 23 1/2. Kompatybilny/zamiennik dla Ford/New Holland: D9NNB856BB, X-A-D9NNB856BB, X-HFD9NNB856BB Zamiennik dla: Ford/New Holland: 230A; 2310; 250C; 260C; 2610; 2810; 2910; 3230; 3330; 334; 335; 3430; 3910; 3930; 4110; 4130 3 cylindry 90-99; 4610; 4630; 4830; 5030; 530A

100% nowy zespół stabilizatora na rynku wtórnym zbudowany zgodnie ze specyfikacjami OEM dla Forda/New Holland. Roczna gwarancja chroni Cię po zakupie. Jesteśmy przekonani, że nasze produkty będą działać bez zarzutu po zamontowaniu w Twoim pojeździe. Ale w rzadkich przypadkach, gdy tak się nie stanie, wymienimy go w dowolnym momencie w ciągu jednego roku od złożenia zamówienia. Jeśli masz problem, podejmiemy wszelkie kroki, aby ci pomóc, skontaktuj się z nami w celu wymiany. Kompatybilny z/zamiennik dla: Ford/New Holland 230A; 2310; 250C; 260C; 2610; 2810; 2910; 3230; 3330; 334; 335; 3430; 3910; 3930; 4110; 4130 3 cylindry 90-99; 4610; 4630; 4830; 5030; 530A. Kompatybilny z/zamiennik dla Ford/New Holland: D9NNB856BB, X-A-D9NNB856BB, X-HFD9NNB856BB. Dane techniczne: zespół stabilizatora, długość: 17 - 23 1/2, średnica wewnętrzna: 3/4, uwagi: W/kołek, szekla i sprzęgło. Bez wsporników i śrub w kształcie litery U. Ustaw od 17 do 23 1/2.
Customer Reviews 4.2 4.2 out of 5 stars 32 ratings 4.2 out of 5 stars
Is Discontinued By Manufacturer No
Item model number 1113-2005
Item Weight 11.97 pounds
Manufacturer Complete Tractor
Product Dimensions 32.75 x 4.1 x 4.3 inches

3.2

6 Review
5 Star
55
4 Star
28
3 Star
9
2 Star
0
1 Star
8

Napisz recenzję

Twój e-mail nie zostanie opublikowany. Wszystkie pola obowiązkowe są oznaczone symbolem*

Scritto da: Ryan McKibben
Great quality except for paint
This is a great quality addition to my tractor. The steel used is hard and the holes are clean and don’t have burrs from drilling that can make it hard to get the pins in and out. The only thing I noticed was that the paint chipped almost immediately while tightening the bolts that hold it onto the lift arms. Not a big deal but annoying.
Scritto da: William R Brown III
Fits a 1985 Ford 2110 compact but not with supplied hardware.
They work. The brackets that fit to tractor under the axle were not made the best. One of the 2 I bought were slightly lopsided. Could have been welded better. The rest of the stabilizers were made good. My tractor is NOT listed as these fitting. They will fit if you use your bolt on the back of the lift arm and use a 1/2" × 3" bolt instead of the one that comes with it. I used a category 0 top link from tractor supply as a shim over the front bracket so it wouldn't have any slop in it.
Scritto da: dpc
They are easier/quicker to adjust.
They keep the implement more stable. They are easier/quicker to adjust. The only thing I don't like is that sometimes the inner bar twists a little. This makes it hard to drop the pin through. Because the hole does not align properly. I think I can remedy this by loosening the bolts, a little, where it connects to the axle.
Scritto da: Daniel W
Kubota M5400
I lost the center portion of this stabilizer bar on kubota M5400 tractor and was able to use the same part of this stabilizer to replace it...
Scritto da: Harry Thomas
Five Stars
good sale
Scritto da: Joe Fischbach
How to place the order without joining Amazon Prime.
The product was accurately described and competitively priced; however, ordering it without joining Amazon Prime was not easy to figure out and place the order. You have to determine how to place the order without using the default Amazon Prime option.

Produkty powiązane

Odkryj naszą międzynarodową sieć

Wysyłamy do 28 krajów, ponad 200 000 produktów. Bądź na bieżąco, zapisz się do newslettera.

Array