Kohler K-GP30324-CP Cimarron Comfort wysoka toaleta, 8x10, polerowany chrom

Brand:Kohler

3.5/5

136.73

Styl montowany z boku. Pasuje również do niektórych toalet Water Guard. Użyj w toaletach KOHLER Wellworth (brak w zestawie), aby uzyskać gładkie spłukiwanie. Oryginalna część firmy Kohler. To jest produkowane w Chinach. To jest bardzo trwałe. Dźwignia i nakrętka Kohlertrip do toalet wellworthclassic, Chrome - 2475625.

Brak dostępnych jednostek
Styl montowany z boku. Pasuje również do niektórych toalet Water Guard. Użyj w toaletach KOHLER Wellworth (brak w zestawie), aby uzyskać gładkie spłukiwanie. Oryginalna część firmy Kohler. To jest produkowane w Chinach. To jest bardzo trwałe. Dźwignia i nakrętka Kohlertrip do toalet wellworthclassic, Chrome - 2475625.
Batteries Included? ‎No
Batteries Required? ‎No
Brand Kohler
Brand ‎Kohler
Color Polished Chrome
Color ‎Polished Chrome
Country of Origin ‎USA
Customer Reviews 4.5 4.5 out of 5 stars 2,538 ratings 4.5 out of 5 stars
Exterior Finish ‎Chrome
Finish ‎Polished
Finish Type ‎Polished
Handle Type ‎Lever
Is Discontinued By Manufacturer ‎No
Item model number ‎K-GP30324-CP
Item Package Quantity ‎1
Item Weight ‎0.25 Pounds
Item Weight ‎4 ounces
Manufacturer ‎KOHLER
Material Plastic
Material ‎Plastic
Number of Items ‎1
Package Type ‎1
Part Number ‎GP30324-CP
Product Dimensions 10"L x 8"W
Product Dimensions ‎10"L x 8"W
Product Dimensions ‎3.88 x 1.15 x 14 inches
Size ‎8"x10"
Style Transitional
Style ‎Transitional
Unit Count ‎1.0 Count
Warranty Description ‎KOHLER One-Year Limited Warranty

3.5

13 Review
5 Star
73
4 Star
14
3 Star
6
2 Star
2
1 Star
4

Napisz recenzję

Twój e-mail nie zostanie opublikowany. Wszystkie pola obowiązkowe są oznaczone symbolem*

Scritto da: Gem
This is the Exact Fit for Kohler Toilet Tank 4519
The Kohler K-GP30324-CP Cimarron Comfort Height Toilet, 8"x10", Polished Chrome flush handle and arm are the correct fit for Kohler WellworthTank 4519. This exact replacement is an updated version that supports both the 'linked' chain and the 'ball chain' styles that connect to the flapper (See image). The chromed metal handle appears identical to the original and attaches to the plastic arm using the same design. This is the stress point and therefore likely to to be the point of a future failure (likely the reason for your current replacement). Note: You will need to keep the clevis from the flapper chain since that part is not included with this kit.
Scritto da: o-namae desu
Q: "Is it metal?" (as of 2023)
As of January 2023, the answer to "Is it metal?" is "yes, partly -- just like the original was". The handle is some kind of metal, chrome plated. The trip bar is plastic. The rotating bushing is either Delrin (some kind of Acetal) plastic or maybe nylon. I believe this is the same as the original, except that it is overall lighter: 87 grams vs. 96 grams for the original. (Thinner metal?) But the very same part# purchased 2 years ago had a chromed *plastic* handle, not metal. Yikes! But that's how Kohler's "chrome" version could be $8 vs. non-chrome finishes which were all $46. All were gen-u-ine Kohler parts, but they really cheaped out with that plastic handle. (Yes, you *can* feel it, both in the way the handle "flips" over with the weight against your hand, and the "cool" temperature drop when touching it.) So now they have --somehow -- kept the price low yet made the handle metal again. Thank goodness. Made in China, of course, and it's pot metal not plated brass, but I believe it's always been that way. This handle is slightly cheaper-feeling than the original because it flops a bit off its axis -- the rod is looser thru the tank bushing -- but maybe that will keep it from binding like the original. It also won't last forever like Crane or Kohler handles from the 1960s, but amply compensated by its current reasonable price!
Scritto da: candy18
Worked for my toilet, not the same brand
My flusher broke and I figured I'd fix it myself. It wasn't an exact fit but I was able to get it to work with my toilet (again, it's not supposed to be compatible so I'm super glad it worked) I took a risk and it worked for me. Been using the flusher for over a month no issue
Scritto da: Experienced Reviewer
So Easy To Install
My flusher handle had been not bouncing up and last night I noticed the toilet was running after I left the room. This of course will quickly raise my water bill and waste water. I was not sure what part to get but found the number under the lid of my tank and this looked the same so I ordered one to be delivered this morning. The hardest part was getting the old one off. It must have been there awhile because it would not budge. I was turning it the right way but the pliers were just snapping off old brittle plastic. Eventually I worked it free and got it out of there. Put the new one through and I just hand tightened the new one on. I'll check later but with plastic I think hand tightening might be sufficient. The directions really did not say to use tools or not so I didn't. Attached the chain and flushed and all is fixed. After removing the other one it only took me about 2 minutes to install this and it's working perfectly. I decided to purchase three more to replace them on all my other toilets rather than waiting for them to fail and waste even more water. Great purchase, exactly the same part for my toilet that has to be 17 years old because our house was built in 2005. Very happy Thanks for reading my review
Scritto da: Paul J. Pelletier
Great product A1sellet
Fits like original handle would recommend highly. Fast delivery wrapped securely.
Scritto da: Boots
It pays to order the original part!
I tried to adapt another cheap version bought at a home center. This one was perfect--easy to install and fit perfectly
Scritto da: DRB
Great buy.
Fit perfectly.
Scritto da: wise buyer
Did not exactly replace the Kohler original part
This is the Kohler recommended replacement part for my Kohler toilet. This replaced the originally installed flush lever/handle. It is the same as the original on the outside of the tank, but on the inside the arm sticks out into the tank much more. In fact, it is only about 1/2" away from rubbing on the filler valve float. it does work but is angled differently. I tried to bend it to readjust it, but its plastic and just springs back. Very close clearance. Maybe this was designed to replace a wide variety of Kohler flush handles and is what I have to live with. Irregardless, it does work.
Scritto da: Jourdan
Worked perfectly.
Price & quick deliver!
Scritto da: Wayne B
The curve went wrong way used a torch to bend where I needed it works great
I had to modify but works perfect
Scritto da: Will McKiernon
Fits my Vortens toilet
I have a Vortens toilet with side mount lever. This lever does the trick! It is worth mentioning that the threads on the mounting hardware are REVERSE, so as you try to remove the old (broken) piece turning counter-clockwise is actually tightening.. Clockwise to loosen & counter-clockwise to tighten the new one on.
Scritto da: Corrina
Handle is too long
Handle is quite a bit longer than original one that come with the toilet. Recommend others to check the length before purchase.
Scritto da: John Chee
Most hardware stores do not have this style in stock.
Nothing to dislike, PERFECT fit for any side handle lever toilet tank.

Produkty powiązane

hot
TOTO THU311N#CP, polerowany chrom
3.3/5

zł 321.16

TOTO THU311N#CP, polerowany chrom
3.3/5

zł 321.16

Odkryj naszą międzynarodową sieć

Wysyłamy do 28 krajów, ponad 200 000 produktów. Bądź na bieżąco, zapisz się do newslettera.

Array