Imadło Yost COV-3 Imadło zaciskowe

Name: Imadło Yost COV-3 Imadło zaciskowe
Brand: Yost Vises
SKU: 0789755001349
Price: 365.37 PLN
Availability: InStock

Brand:Yost Vises

3.5/5

zł
365.37

Wymienne okienko do przyłbic Sellstrom serii 390. Okno z ciemnozielonego octanu premium zapewnia odporność na zachlapania i zarysowania. Spełnia normy ANSI Z87.1+ i CSA Z94.3 po zamontowaniu z osłonami twarzy serii Sellstrom 390. Mierzy 12 szerokości na 8 wysokości i 0,040 grubości.

Kwota

Dodaj do koszyka Kup Teraz

EAN: 0789755001349

Kategorie Narzędzia i ulepszenia domu, Przemysłowe i naukowe, Narzędzia elektryczne i ręczne, Trzymanie robocze, Narzędzia ręczne, Zaciski, Zaciski stołowe,

GWARANCJA: Obejmuje roczną ograniczoną gwarancję i 90-dniowy zwrot. INFORMACJE DOTYCZĄCE BEZPIECZEŃSTWA: Niewłaściwe użycie imadła może spowodować poważne obrażenia oczu, rąk i/lub innych części ciała. Imadła muszą być prawidłowo ustawione i używane. Przed konfiguracją i użyciem przeczytaj, zrozum i postępuj zgodnie ze wszystkimi instrukcjami zawartymi w instrukcji. JAKOŚĆ IMADŁA YOST: Każde narzędzie Yost Vises zostało zaprojektowane tak, aby spełniało wysokie standardy jakości, wytrzymałości i trwałości. Przedkładamy jakość nad ilość i wytwarzamy produkty, które są bezpieczne i łatwe w użyciu. Oferujemy dożywotnie wsparcie techniczne, aby wesprzeć naszą gwarancję jakości. SPOSÓB UŻYCIA: Upewnij się, że imadło jest bezpiecznie przymocowane do stołu warsztatowego, a blokada podstawy obrotowej jest bezpieczna. Otwórz imadło, obracając uchwyt imadła w kierunku przeciwnym do ruchu wskazówek zegara. Umieść przedmiot między ząbkowanymi szczękami. Zamknij imadło, obracając uchwyt imadła zgodnie z ruchem wskazówek zegara, aż przedmiot znajdzie się w ząbkowanych szczękach, kontynuuj dokręcanie, aż nie będziesz mógł już przesuwać przedmiotu. Nie dokręcaj zbyt mocno, ponieważ może to uszkodzić przedmiot i/lub imadło. Po zakończeniu pracy nad przedmiotem obróć uchwyt śruby w kierunku przeciwnym do ruchu wskazówek zegara, aby zwolnić przedmiot. SPECYFIKACJA TECHNICZNA: Szerokość szczęki 3 (7,62 cm), rozwarcie szczęki 2,5 (6,35 cm), głębokość gardła 1,625 (4,1275 cm). PRZENOŚNE IMADŁO: Yost Vises COV-3 3-calowe imadło zaciskowe jest wykonane z odlewów z żeliwa szarego o wytrzymałości 30 000 PSI. Ma platerowaną stalową śrubę i uchwyt oraz stalowe podwójne pręty prowadzące. Możliwość mocowania rur o głębokości do 3/8 cala.

Brand	Yost Vises
Color	Original Version
Is Discontinued By Manufacturer	No
Item Dimensions LxWxH	9 x 6 x 3 inches
Item model number	COV-3
Manufacturer	Yost Tools
Material	Iron
Product Dimensions	9 x 6 x 3 inches; 4.32 Pounds
Style	Portable,Triangular

5 Star

4 Star

3 Star

2 Star

1 Star

Napisz recenzję

Twój e-mail nie zostanie opublikowany. Wszystkie pola obowiązkowe są oznaczone symbolem^*

Twoja ocena

Scritto da: chuck sanders

using to re-grip golf clubs. Works great for that.

using this to re-grip golf clubs, this vice works great for this job if you use re-griping rubber inserts.fast and easy .

Scritto da: GWB

Lightweight Vise

Not bad for what it is, but it is pretty small and lightweight.

Scritto da: robert new

Ease of use

Great quality, vary easy to use.

Scritto da: Charlie Griffin

Surprisingly sturdy

This vice has held up very well. I thought it would be a little bigger in person but as long as you keep your expectations realistic it works great.

Scritto da: Robbie

Only for lightweight use

Nothing wrong with the quality, but be warned this is for very lightweight tasks. If you need to torque anything the vise will move on you. Not meant for anything that will hang over the edges. If you try to use anything that will hang over the edges, the vice doesn’t have enough strength to stabilize these items.

Scritto da: Lindsay B.

Very small vise

This is a small vise! Buy a bigger one if you can. Needed this size to mount to the side of a tool box. No groove for pipes which is a downside. Only good for very light duty projects. Clamp makes it easy to move around and store when not in use.

Scritto da: WTK

Much better and handier than I suspected.

I needed a small yet tough mobile clamping vice. This fits the bill well. It’s not delicate at all and it’s certainly for a great price will be on a “modeling vice” or clamps. Happy.

Scritto da: Dan Newcome

... enough mass to it that it would not vibrate like crazy or flex when I did some medium-duty cutting ...

I wanted a little clamp vise that had enough mass to it that it would not vibrate like crazy or flex when I did some medium-duty cutting and drilling. This mostly fits the bill but there are some kind of annoying things about it. The biggest thing is that the jaws are beveled a bit so that the top edge of the jaws meet but there is a gap that widens down through the rest of the jaw. This means that the clamping force is all at the very top of the jaws. It's hard to get a solid grip on larger pieces of material and they tend to slip sideways when working. It would have been nice if this had removable jaws. The little anvil on the back is a nice touch but it's very small. It seems like they could have faced it off a bit larger. Other than that it's got just enough mass to it that it doesn't vibrate or flex and it's not so heavy you can't put it in a normal drawer when not in use. I just wish it held a little tighter.

Scritto da: Misha Knight

MADE IN CHINA

Bought this specific vise after reading good reviews about it and I make purchasing decisions made on where things are made. I opted for the "Taiwan Made" Yost COV-3 Model over the American one because of the extra 0.5" of Jaw Width. I do my absolute best not to buy goods made in China. Deceptive marketing by the seller has duped me. I would be sending this back if not for my need to finish a time sensitive project. Next time I will be paying the extra and buying 100% American when offered the option. 1/5 Stars based on this alone, Would give 0/5 If possible. Thanks Amazon, I will be buying less things from you now.

Scritto da: Johnny J

Flaw in the design

The vise itself is a sturdy little unit although as noted in other reviews the jaws are smooth and not textured like they are in the picture. The problem that I found, and I would say that this applies to the Irwin vise and others of this design, is that the two support bars and the threaded bar are all in line down the centre of the vise. What I found is that this made it impossible to hold anything tightly as the jaws flex as you tighten the vise. This is especially important if you are trying to hold something small or trying to hold something in the side of the vise for cutting or filing. In conclusion, it isn't a terrible vise, but for fine work I would consider other options.

Scritto da: Constantine Vorobyov

2.5

No inserts from steel, cast iron is brittle, i they are getting damaged quickly. Large gap on stop screw, - wrong size screw. This is definitely not 5 stars, reviews are clueless as always. For ~40 it's poor quality.

Scritto da: Don Hall

Ideal for light repair work.

A sturdy, practical vise that can be clamped to a work surface, or secured by screws through the front casting.

Scritto da: Binman

Great

Great product for what I need it for