0
0

Całkowity:zł 0.00

Zobacz koszykWymeldować się
LoginRegister
0

Całkowity:zł 0.00

Zobacz koszykWymeldować się
LoginRegister

Gaźnik Briggs & Stratton 299437 zastępuje 297599, szary, 8 cali

Brand:Briggs & Stratton

3.5/5

zł
884.10

Utrzymaj działanie — zachowaj oryginalność. Pomóż utrzymać najwyższą wydajność sprzętu zasilającego do użytku zewnętrznego, zamawiając części zamienne i konserwacyjne firmy Briggs & Stratton. Możesz znaleźć odpowiednią część, której potrzebujesz, w tym gaźniki, filtry powietrza, świece zapłonowe, zestawy tuningowe i inne części do naprawy silnika. Tylko oryginalne części firmy Briggs & Stratton są specjalnie projektowane zgodnie ze standardami OEM, produkowane i testowane w celu zapewnienia optymalnej wydajności silników Briggs & Stratton. ale korzystanie z nich gwarantuje, że silnik firmy Briggs & Stratton, w którym są zainstalowane, jest zgodny z obowiązującymi przepisami dotyczącymi emisji (EPA).

Kwota
Dodaj do koszykaKup Teraz

EAN: 0024847807219

Kategorie Patio, trawnik i ogród, Elektronarzędzia zewnętrzne, Części zamienne i akcesoria, Części i akcesoria do kosiarek, Akcesoria do kosiarek, Zestawy tuningowe,

Zastępuje stary Briggs # 297599. Oryginalna część Briggs & Stratton. Pasuje do silników Briggs & Stratton serii 135200, 130200, 100200. Oryginalny numer części Briggs & Stratton 299437.
Country of Origin China
Customer Reviews 4.5 4.5 out of 5 stars 103 ratings 4.5 out of 5 stars
Domestic Shipping Item can be shipped within U.S.
International Shipping This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer No
Item model number 299437
Item Weight 1.3 pounds
Manufacturer Briggs & Stratton
National Stock Number 2910-01-021-2193
Product Dimensions 1 x 7 x 8 inches

3.5

13 Review
5 Star
74
4 Star
9
3 Star
10
2 Star
3
1 Star
4

Napisz recenzję

Twój e-mail nie zostanie opublikowany. Wszystkie pola obowiązkowe są oznaczone symbolem*

Scritto da: SC Boy
Bad gasket
I think the carb is fine, but the diaphragm was faulty and was spraying gas out the side. At first I thought it may be a machining issue with the cover plate but thankfully not. Luckily i had another gasket in hand and it worked fine. Would have returned but after going through all you do to get a new carb installed like this it was not worth it to me. Anyway, my suggestion is to have and extra diaphragm gadket on Hand anyway..they are pretty cheap.
Scritto da: S. Gundersen
Replaced hard to find model.
Stretch? Have no idea what this means involving a carburetor. Was not easy to install, you have to remove the whole fuel tank to replace, but that's what it takes. Value for money. Hmm, well this carburetor cost upwards of $100. when there were countless ones for $25.-30, but they were not exactly the same replacement part. I like that this is a Briggs and Stratton and not an off brand. This went on a Montgomery Ward log splitter.
Scritto da: Hairbender
Doesn’t run very well.
I was surprised I found a replacement. It was a challenge to replace.
Scritto da: Kendall
If its not an OEM part is so close I can't tell
Came in a Briggs & Stratton box and had adjustment instructions with their logo, fit exactly except for the air filter port which is fair, I was replacing the carb on a 30 year old engine and I know its an updated part number. Runs like a champ 5 minutes after installing. A bit pricey but its a more or less obsolete model, was fortunate to still be able to get one at all.
Scritto da: Ben
Keep your old carburetor. You will need parts off it!!
Great carb. Put it on and fired right up with 2 pulls. Also replaced the mounting gaskets and air filter. Keep your old carburetor, you will need a screw and a rubber piece off of it. Pictures of both.
Scritto da: Amazon Customer
Make sure you Order the right part.
It was a bit different where the Air Filter fit on and I had to add an extra gasket to raise the filter housing. It would be nice to have the necessary manifold and tank mount gaskets included with the carburetor . Other than that it was good and worked well.
Scritto da: Ben Brody
works good as new
Bought this as a replacement for a 40 year old splitter unit that cracked at the mounting flange. I had been having issues with the motor's vibration loosening the carb/head bolts, and I think that's what led to the failure. Pro tip: install stainless studs and locknuts instead of replacing the bolts - much more secure.
Scritto da: george
works well on troybilt pony 5hp.
I replaced this and the spark coil and brought new life to my father in laws old pony.
Scritto da: NEIL
Purchase from manufacturer for the part you're replacing when you can.
The part is absolute and delivered quickly. Paid more than some others advertised and in some cases 3 for 1 but I went with Briggs and Stratton. I will be shipping item back only because a mechanic I use had a couple sitting around his property . Removed and replaced, worked out great. But I would definitely pay the extra to Briggs and Stratton for this type of part especially so for a carburetor.
Scritto da: Derek - Journeyman Technician
Missing throttle plate completly manufacturers defect? also damaged during shipping
I received this Carb and it looked like the box was used a soccer ball. Inspected the carb and all seemed okay except for one of the plastic tubes (shorter one) was broken so I went to my local small engine reseller and got a new one (not really a big deal only a couple bucks). I bolted up the carb and started my engine and the engine ran away immediately, it's a good thing I had the air cleaner off because I was able to put my hand over the air intake and choke the engine out and make it stop. I of course though it was something I did. I verified that my carb setting were correct and started it again...this time with my hand ready to choke off the air. I let it rev up (controlling air flow into the carb with my hand) and verified that the governor and linkage were doing their job (as the engine revved up, the governor moved the throttle plate into zero fuel position. Long story short I took the carb on and off a few more times and finally realized that the carb did not have a plate (inside of it) attached to the throttle linkage therefore the throttle linkage was useless and stuck in 100% fuel all the time. Now extremely annoyed I harvested parts off my new useless carb and put them on my old original one and bolted that one on, now everything works fine. What a waste of money - I wasn't going to bother complaining but the review popped up. I guess chock this up to a manufactures defect? No idea but cost me a pile of time, money and aggravation.
Scritto da: Amazon Customer
Fuel pump gasket defective!
Fuel pump is pouring gas out right next to muffler. Its a Briggs and Straton carb but its 100% made in China according to the box. Go to your dealer and buy this. Triple the price of the cheaper Amazon carbs and still made in China.....
Scritto da: Amazon Kunde
Angaben des Verkäufers sind nicht korrekt
Dieser Vergaser ist nicht Original. Er ist zu groß. Ich habe ca. 80€ bezahlt aber er hat Probleme gemacht. Das Benzin ist ausgerungen. Deshalb möchte ich hiermit dieses Produkt reklamieren! Ich kann es nicht akzeptieren, dass Sie original dazuschreiben und er aber nicht passt! Das ist eine Frechheit. Ich werde nie mehr von diesem Verkäufer etwas weiterempfehlen und auch nichts mehr kaufen.
Scritto da: Josef Kickinger
Vergaser
Ich benötige den Vergaser für einen älter als 30jährigen Balkenmäher, der Vergaserflansch war abgebrochen. Laut Auskunft der regionalen B&S Servicestelle gibt es für diesen Motor keine Ersatzteile mehr. Durch Zufall fand ich bei Amazon jedoch dieses Teil. Ergebnis: Schnell geliefert, montiert und Mäher gestartet, läuft wie neu.

Produkty powiązane

hot
Pasek klinowy Briggs and Stratton 1728008SM, 89,3, brązowy
3.3/5

zł 324.62

Pasek klinowy Briggs and Stratton 1728008SM, 89,3, brązowy
3.3/5

zł 324.62

hot
Gaźnik Briggs & Stratton 499952
3.9/5

zł 813.65

Gaźnik Briggs & Stratton 499952
3.9/5

zł 813.65

hot
Gaźnik Briggs & Stratton 590399 zastępuje 796077
3.5/5

zł 756.58

Gaźnik Briggs & Stratton 590399 zastępuje 796077
3.5/5

zł 756.58

hot
Gaźnik Briggs & Stratton 796608
3.6/5

zł 432.02

Gaźnik Briggs & Stratton 796608
3.6/5

zł 432.02

hot
Stens nowy gaźnik OEM 615-729 do Walbro WT-76-1
3.6/5

zł 651.83

Stens nowy gaźnik OEM 615-729 do Walbro WT-76-1
3.6/5

zł 651.83

hot
Briggs & Stratton 796964 Magneto Armature Zastępuje 695711/555530/557040
3.6/5

zł 338.68

Briggs & Stratton 796964 Magneto Armature Zastępuje 695711/555530/557040
3.6/5

zł 338.68

hot
PRIME-LINE Prime Line 7-01612 Cewka zapłonowa
3/5

zł 279.35

PRIME-LINE Prime Line 7-01612 Cewka zapłonowa
3/5

zł 279.35

hot
Briggs & Stratton 797421 Osłona wahacza zastępuje 794659/791079/692492
3.8/5

zł 311.36

Briggs & Stratton 797421 Osłona wahacza zastępuje 794659/791079/692492
3.8/5

zł 311.36

Odkryj naszą międzynarodową sieć

Wysyłamy do 28 krajów, ponad 200 000 produktów. Bądź na bieżąco, zapisz się do newslettera.

Array

Całkowity:zł 0.00

Zobacz koszykWymeldować się

Kategorie

Wszystkie kategorie
Menu Kategorie W pobliżu Wózek

Menu