Extreme Max 5600.3139 Mocowanie wyciągarki ATV do Kawasaki Brute Force

Brand:‎Extreme Max

3.7/5

416.42

Ważna jest odpowiednia wyciągarka, podobnie jak mocowanie, którego z nią użyjesz. Właściwe mocowanie wyciągarki maksymalizuje wydajność i bezpieczeństwo wyciągarki oraz płynnie integruje wyciągarkę z pojazdem ATV. Ten uchwyt wyciągarki Extreme Max pasuje do wybranych quadów Kawasaki Brute Force (pełne informacje znajdują się w tabeli dopasowania na zdjęciach produktów). Nasze uchwyty do wciągarek są przeznaczone do użytku ze wszystkimi wciągarkami ATV/UTV od 2000 funtów. do 3600 funtów. z następującymi schematami montażu: Standard 4-otworowy (4,875 x 3) i Standardowy 2-otworowy. Uchwyt ma stalową konstrukcję malowaną proszkowo, która zapewnia trwałą wydajność i ochronę przed rdzą i uszkodzeniami. Zaprojektowany z myślą o łatwej instalacji. Potrzebujesz nowej wciągarki? Sprawdź wyciągarkę Extreme Max Bear Claw ATV / UTV, dostępną w modelach 3100 funtów (5600.3072) i 3600 funtów (5600.3075). Extreme Max oferuje również kompatybilne przerzutki kluzowe i rolkowe, a także kompletną linię kabli ATV, lin, haków i innych akcesoriów.

Brak dostępnych jednostek
Dwuletnia ograniczona gwarancja. Łatwa instalacja, obszerne instrukcje w zestawie. Stalowa konstrukcja malowana proszkowo zapewnia trwałą wydajność i ochronę przed rdzą i uszkodzeniami. Zaprojektowany do użytku ze wszystkimi wyciągarkami ATV/UTV od 2000 funtów. do 3600 funtów. z następującymi schematami montażu: Standard 4-otworowy (4,875 x 3) i Standardowy 2-otworowy. Mocowanie wyciągarki ATV do wybranych pojazdów ATV Kawasaki Brute Force — pełna lista znajduje się w tabeli dopasowania.
Brand ‎Extreme Max
Country of Origin ‎China
Customer Reviews 4.6 4.6 out of 5 stars 341 ratings 4.6 out of 5 stars
Item model number ‎5600.3139
Item Weight ‎6.65 pounds
Manufacturer ‎Extreme Max
Manufacturer Part Number ‎5600.3139
Product Dimensions ‎14 x 12.5 x 2.5 inches

3.7

13 Review
5 Star
77
4 Star
14
3 Star
4
2 Star
2
1 Star
4

Napisz recenzję

Twój e-mail nie zostanie opublikowany. Wszystkie pola obowiązkowe są oznaczone symbolem*

Scritto da: jennifer
Mounted right up !
Product mounted right on no need to modify
Scritto da: A Mike and His Lude
‘14 Brute Force Perfect Fit!!
I purchased this winch mount for my 2014 Brute and it fits perfect. The kit Supplied u-bolts and instructions to make this an easy install with no need to go buy any other parts. All though I did switch the u-bolts out for stainless but the supplied hardware was certainly sufficient for the job. My fairlead didn’t fit but that’s MY fault. This mount has a 4 7/8” fairlead hole mount ( holes measured on center) and my fairlead was to small. 4 7/8” is pretty standard so I don’t know why mine was smaller. Anyway, it worked out perfectly ! Thanks
Scritto da: R. S. Jones
Fits 2005 Brute Force 750 just fine
The mounting plate sits in the required space with all the proper angles. I guess the bargain comes from the generic hardware. They are U-bolts available from any hardware store. They fit the frame pretty tight and scratched up the frame paint pretty bad. A possible rust location is now there for sure. The brute force doesn't have pure vertical frame bars, thus I twisted the second U-bolt and it fit better.
Scritto da: Bill U.
Rear u bolt holes were drilled ofse the wrong way. No big deal if you have any experience.
Fit perfectly on my 2012 kawasaki brute force 750.Had to modify the rear mounting holes a bit but no big deal.The rear u bolts were also a little small but I got them on. Great for the money
Scritto da: Paul
Easy install
Great fit for the brute force 750 however, front platefor the cable angles down. I would rather it face straight.
Scritto da: Mike Hastings
Great product
This winch mount installed without removing anything and was super ez. The hardware was all there and worked perfectly. This was put on my new 2022 bruteforce.
Scritto da: zookie
ggod fit
works well, seems strong
Scritto da: Jomama
Fit perfect, extremely cheap but one u bolt was bad
Low price good fit just had to replace one u bolt
Scritto da: Kyle riley
Price is right
The plate is good the front u-bolts fit perfect the rear was a nightmare. It took about a half hour to shape the u-bolts in a vice to make them work and the holes were powder coat to heavy for them to fit through. Plate is good hardware is meant to go in your bolt bin
Scritto da: Amazon Customer
Good for the money
Was very good for the money and came with everything described and fit very good !!
Scritto da: RP
High quality mounting plate
The mount itself is perfect, it fit my 2016 brute force 750 perfect. Makes for a nice clean job. Supplied u-bolts aren't great so I used my own. I'm happy with the purchase.
Scritto da: Sophie
Well made
Quality product , easy install and fits perfectly on my 2021 brute force 750 .
Scritto da: Corey
Great buy!
Fits perfect. Don’t bother messing around with the universal that comes with winches.

Produkty powiązane

hot
OSTRZEŻENIE 94700 Wciągarka 4700 DC
4.1/5

zł 5575.52

OSTRZEŻENIE 94700 Wciągarka 4700 DC
4.1/5

zł 5575.52

hot
Camco Wciągarka do przyczepy do łodzi
3.7/5

zł 512.40

Camco Wciągarka do przyczepy do łodzi
3.7/5

zł 512.40

Odkryj naszą międzynarodową sieć

Wysyłamy do 28 krajów, ponad 200 000 produktów. Bądź na bieżąco, zapisz się do newslettera.

Array