CURT 55774 Podwójne wyjście 7-stykowe, 4-stykowe złącza po stronie pojazdu, wymagany fabryczny pakiet holowniczy i gniazdo USCAR, czarny

Brand:‎CURT

3.5/5

332.09

Niestandardowe złącze okablowania CURT (czasami nazywane złączem T) to proste urządzenie elektryczne typu plug-and-play, które eliminuje potrzebę cięcia, łączenia i lutowania podczas instalowania okablowania pojazdu z przyczepą. Większość pojazdów nie jest gotowa do holowania. O ile Twój pojazd nie jest wyposażony w zestaw do holowania, prawdopodobnie nie jest wyposażony w złącze przewodów przyczepy. W tym miejscu do gry wchodzą niestandardowe złącza okablowania CURT. Niestandardowe złącze przewodów wykorzystuje pojedynczą wtyczkę oryginalnego wyposażenia do podłączenia do specjalnego gniazda dostarczonego przez pojazd. Chociaż ta opcja nie jest dostępna w każdym pojeździe, niektórzy producenci samochodów projektują swoje pojazdy tak, aby można je było łatwo wyposażyć do holowania, dostarczając gniazdo zintegrowane z układem elektrycznym pojazdu, aby łatwo akceptować niestandardowe złącze przewodów. Dzięki niestandardowemu złączu przewodów CURT nie ma potrzeby podłączania do zespołu tylnego światła, ponieważ specjalne gniazdo jest już dostępne. To specjalne niestandardowe złącze okablowania faktycznie zapewnia dwa gniazda złącza dla opcji uniwersalnej. Podłącza się go do złącza OEM i oferuje 4-kierunkowe płaskie i 7-kierunkowe złącze kasetowe RV. Jest dostarczany ze wspornikiem montażowym ułatwiającym instalację i został zaprojektowany jako niestandardowa opcja okablowania dla różnych pojazdów (patrz informacje o aplikacji, aby zweryfikować dopasowanie). Niestandardowe złącza przewodów CURT zostały zaprojektowane tak, aby były trwałe i proste w instalacji. Wyposażone są w osłony przeciwpyłowe, które utrzymują złącze w czystości, gdy nie są używane.

Metalowy wspornik bezpiecznie mocuje przewody do pojazdu lub zaczepu przyczepy. TRWAŁA KONSTRUKCJA. Aby zapewnić długotrwałe użytkowanie i niezawodne połączenie, obudowa tego podwójnego 7-stykowego i 4-stykowego gniazda elektrycznego przyczepy jest wykonana z wytrzymałego czarnego tworzywa sztucznego, które nigdy nie rdzewieje ani nie koroduje. USCAR-SPECIFIC. To gniazdo wiązki przewodów przyczepy jest przeznaczone do określonych pojazdów ze standardowym gniazdem USCAR. NIEZAWODNE POŁĄCZENIE. Te gniazda okablowania przyczepy są gotowe do podłączenia do istniejącego okablowania pojazdu za pomocą fabrycznego gniazda USCAR. Łączą tylne światła, światła hamowania, kierunkowskazy, światła cofania, elektryczne hamulce przyczepy i zasilanie pomocnicze. ODPORNE NA WARUNKI POGODOWE. To dwukierunkowe gniazdo okablowania przyczepy zostało zaprojektowane tak, aby przetrwać warunki atmosferyczne. Gniazdo 7-stykowe ma sprężynową osłonę przeciwpyłową, która utrzymuje punkty połączeń w stanie suchym i chronionym, gdy nie są używane. WSZECHSTRONNY PROJEKT. To złącze z dwoma wyjściami to świetne ulepszenie dla różnych pojazdów z gniazdem USCAR. Zapewnia dwa standardowe gniazda przewodów przyczepy, 4-kierunkowe płaskie i 7-kierunkowe okrągłe gniazdo RV, co pozwala na wszechstronne opcje holowania. Typ dopasowania: uniwersalne dopasowanie.
Brand ‎CURT
Country of Origin ‎Taiwan
Customer Reviews 4.4 4.4 out of 5 stars 2,557 ratings 4.4 out of 5 stars
Exterior ‎Painted
Is Discontinued By Manufacturer ‎No
Item model number ‎55774
Item Weight ‎1.13 pounds
Manufacturer ‎Curt Manufacturing
Manufacturer Part Number ‎55774
Model ‎Custom Wiring
OEM Part Number ‎55774
Product Dimensions ‎9 x 4 x 2 inches

3.5

13 Review
5 Star
73
4 Star
12
3 Star
6
2 Star
2
1 Star
6

Napisz recenzję

Twój e-mail nie zostanie opublikowany. Wszystkie pola obowiązkowe są oznaczone symbolem*

Scritto da: Robert j Hayes
works
does what it's supposed to do
Scritto da: Jeanette Pio
very easy to install
easy to install and now I hook to different trailers without an adapter
Scritto da: james b
Packaging was destroyed and taped up
Product had previously been open. Don’t know if anything was missing
Scritto da: ajburns12
Was not plug and play
I ordered this for my 2000 Ford F-250 Super Duty at the same time as I ordered a Reese hitch for it. My truck originally only had the 4 way plug, so my thought was with this I’d be able to keep the 4 way and then also gain the functionality of a 7 way as well. Both products came in the same day so I went to mount the bracket for this on the Reese hitch prior to installing on the truck and immediately noticed you only get 4 screws total, when there’s spots for 6 (2 to mount the bracket on the hitch or vehicle, and 4 to mount the plug to the bracket). So I used 2 for the bracket and then 2 on the plug. Not world ending but it would have been nice to receive 6 so we didn’t have empty slots. From there a friend and I went to install the hitch on the truck. After mounting the hitch I went to find the USCAR plug for this harness and it was nowhere to be found, even though this harness said it fit my truck. Maybe my truck doesn’t have a factory tow package, it’s 20 years old and I bought it about a year ago so I’m unaware of what all it originally came equipped with from the factory. However, my truck did not have the USCAR plug. It did have the 7 wires needed to wire this system into place though. I just had to cut the plug off of this and then use butt connectors to install it into the trucks wiring. After that it works fine, but it turned a 30 second plug and play job into about 30-45 minutes of trying to find a wiring diagram and having to match things on my own. Not the end of the world because I was able to get it to work, however this is not what I thought I was getting. At the end of the day I’m giving this an overall rating of 4 stars because it is made well, but they short you 2 screws and also didn’t fit my truck as advertised. I would have rated 3 stars, but I’m going to say the fitment issue is probably my own doing since I don’t know if I have the factory tow package or not.
Scritto da: David
It fit
Replace the broken one on my truck
Scritto da: Ryan konkle
Very easy to install and works awesome
Very easy to install and works awesome
Scritto da: Brett f.
Easy to install and it works great.
I like the fact that you just plug in to the factory trailer wiring harness which literally took me about a minute to do and then you can simply just mount it in an appropriate place Using a drill and some sheet metal screws and if you already previously had a similar type of unitinstalled you can literally pull out the old screws and put it right in and the whole thing takes about 5 minutes assuming the old screws aren't rusted.
Scritto da: paul w juneau
Easy Peezy
2010 Ford F-150. Person I bought truck from had backed into a post and mangled the trailer connector and bracket, see pics. After using dremel tool to remove old bracket, the new bracket supplied in the kit fits perfectly using self tapping screws. The new plug simply plugged into the factory connector, and tested 100%. Well worth the money.
Scritto da: Curtis
Does not fit!
This is NOT a direct fit for a 2004 ford super duty as advertised. This was a part that the Amazon algorithm picked for my specific vehicle. I guess buyer beware! It said that item was plug and go, but now I will spend hours modifying it to fit. I will avoid this brand from now on! UPDATE “Curt manufacturing” responded to an email of my fitment issues with no concern, no assistance offered, and basically told me it was my fault, and that they don’t even have a plug to fit the original equipment on my truck. They know it’s not plug and go and advertised as such anyway.
Scritto da: Amazon Customer
Plug and Play
Easy to plug in and install. Works like it should!
Scritto da: Blair Fraser
The leads for the four wire plug in are a bit short. About 4 inches longer would have been perfect.
The leads for the four wire plug in are a bit short. About 4 inches longer would have been perfect.
Scritto da: Trevor Macintosh
Worked for me
Wasn’t plug and play for my truck, with a little splicing I made it work. Still was a cheap alternative for my Tacoma
Scritto da: Gav
Works as intended!
I don't tow, but I purchased this to replace my new trucks regular 7 pin connector since it didn't come with a 4 pin connector. It plugged right into my 2004 Chevy Silverado 5.3L ZR1 trucks factory harness. Checked compatibility through etrailer.com which is also how I found this harness. Installed the bracket right into the bumper with self tappers, tied it all up, installed my tailgate LED strip and works just fine. Would definitely recommend.

Produkty powiązane

hot
Produkty AP 014-126741 Korektor
3.5/5

zł 282.80

Produkty AP 014-126741 Korektor
3.5/5

zł 282.80

hot
Reese Towpower 85248 4-drożny trójnik
4.1/5

zł 216.19

Reese Towpower 85248 4-drożny trójnik
4.1/5

zł 216.19

Odkryj naszą międzynarodową sieć

Wysyłamy do 28 krajów, ponad 200 000 produktów. Bądź na bieżąco, zapisz się do newslettera.

Array